Band Brake Rod?

Status
Not open for further replies.

jeckel7234

New member
Messages
25
Reaction score
0
I was planning on building my first kart but i found a good deal on craigslist for a kart that was a little tight for my 6' 2" frame. i extended the kart 8 1/2" ive got everything hooked back up how it needs to be except for the band brake, before there was aluminum round bar that was connected to the pedal and the band brake itself. Im having a problem finding aluminum round bar small enough. What kind of recommendations do you fellas have.

Thanks
 

soggycrashed

Member
Messages
247
Reaction score
2
Location
Honolulu
Just some info on what I did when extending:
The rod was pre-bend to fit around the karts frame and to position the band correctly, so I got a 1/4 rod and cut the ends off of the old one.
Then I welded the old ones onto the new rod, and bent it a little bit (propane torch) to make it grab more.

Locks wheels at 40.
 
Status
Not open for further replies.
Top