Baja Dune 150

[Nishnabe]

Alright so I picked this baby up Sunday for 500 dollars and then I get a call from this dude I have been trying to get ahold of for like 5 weeks. He is selling a 2005 Roketa 250 atv for 250 bucks because it has a broken axle.

Well how hard will it be to put that drive train into my kart?

 

[Nishnabe]

How do you take this off

 

[Kaptain Krunch]

a strap wrench would work well, then you most likely need a wheel puller to get the actual flywheel off, or you can be cheap like me and use a few flathead screwdrivers and apply even pressure on both sides (carefully.

 

[thgrahamjr]

That's a GY6 Honda clone, I have one also and had to remove the flywheel to replace the stator. I put two bolts in the flywheel where the fan bolts up and used a big screw driver put through the two bolts to hold it while I removed the end nut.

 

[Nishnabe]

thanks i just seen it on youtube

 

[Kenny_McCormic]

Impact gun and harmonic balancer puller to remove, strap wrench and torque wrench to reinstall.

 

[Nishnabe]

I tried the bolts thing it didnt work. I currently dont have access to impact gun

 

[Nishnabe]

is this nut lefty loosey righty tighty?

 

[thgrahamjr]

I can't remember but try it both ways.

 

[Nishnabe]

well i went out and bought a compressor and air tools so tommorrow I shall try the impact wrench

 

[ed1380]

http://www.rc-trucks.org/gy6-engine-performance.htm

 

[Nishnabe]

So I took the impact wrench to it and brrrzzz brrrrzzz it came off like it was nothing. I cant believe it was that easy.

Anyways I installed the new coil and CDi no spark tomorrow my stator shoudl come in.

If that doesnt work I guess I will be tracing every single wire.

 

[Kaptain Krunch]

You should always trace every wire first, then test each component with a multi-meter. It saves money, and time waiting for parts to come in the mail

 

[Nishnabe]

Your absolutely right. It turns out that the AC Power wire and trigger pulse wire were crossed. ut:

But I have an upgraded ignition and as soon as I get my uni, jets and yellow spring I will be modded real good. So actually I am not losing any money. per say.

THanks for the help guys.

 

[motor_head]

He is selling a 2005 Roketa 250 atv for 250 bucks because it has a broken axle.

Well how hard will it be to put that drive train into my kart?

buy it
shouldn't be to hard

 

[mcburton3]

Voltage on Stator line

Anyone know what the voltage should be on the stator of the Dune 150 engine when attempting to start the engine? I don't have fire on my plug and cannot figure out why. I have the repair manual that Baja makes available to the public, but the wire colors are not correct, etc, and the manual looks like a bad conversion from Chinese, so it is hard to know what voltage to look for on the ignition wires.

Thanks,

Matt