Baja Doodlebug rebuild

[Teerone]

Just wanted to share some photos of a fun little project. I bought this bike for $200. The bike was originally red and had a terrible "rattle can" paint job. There were several other issues that needed to be addressed. I used nailpolish remover & a small wire brush to remove the black spray paint from the sprocket, brake rotor, and most of the hardware. I chose a dark gray gloss for the new paint. Stripped it down, replaced a ton of parts, and what you see is the final result.

 

[2SlickNick]

Looks like a nice clean build!

 

[Mrmonk7663]

I like it. Was the engine mount modified to fit the predator or did it bolt right in?

 

[Hellion]

I give it two thumbs up.
The gloss grey is a great choice and sets it apart from the rest.

Is that an Ebay exhaust pipe from JTWFabrication?

I like it. Was the engine mount modified to fit the predator or did it bolt right in?

Good eye. Looks like he has something a little extra on the frame...

 

[Functional Artist]

Nice Job!
...like the graphics too

Your bike looks like the "gas" version of my Serengetti Badger 450 (El Mini)

Gonna add a chain guard (to help protect your leg)
...or rear fender? (to help protect your engine)

 

[Teerone]

I bought it with the Predator 212. It was mounted on the original bolt holes, which made it sit way too far to the right. I added a mounting plate and it makes all the difference.
The engine mount bolted in with (2) of the four bolts. I did not find it necessary to drill the other two holes. This bike is pretty much rode on smooth, flat surfaces.

 

[pearl111]

Looks good I like those doddle bugs. I rebuilt one of theme earlier this year.

I would keep an eye on that motor if you are only using two bolts to mount it to the motor plate.

 

[Functional Artist]

Hey I found an ad in an old catalog (Northern Tools 2010)
...that shows a Baja Motorsports Doodle Bug like yours

 

[Teerone]

The motor plate has 2 bolts holding it to the frame. There are 4 bolts holding the motor to the plate itself.

 

[pearl111]

Thanks now I understand.

 

[Mnshaw]

How fast does she go?? I just got one with a 2.5hp lifan on it and I want to put in the predator 212. Ive never done this before anybody have any tips or pointers? what am I gonna need to do this swap??

 

[Teerone]

I have not yet attempted to see how fast it will go. I have been a go kart guy all of my life so 2 wheels is a bit new to me. Lol