B&S Question

Status
Not open for further replies.

oldbikerarlo

Old guy
Messages
449
Reaction score
2
Location
Marana, Az.
OK first off this is a B&S and the recoil starter is from a 3.5 The PTO is 3/4 and the acc shaft is 1/2, Can someone tell me what HP this thing is. maybe an age and if its worth anything. It does run real sweet no smoke, and nothing is knocking inside.
 

Attachments

  • 049.jpg
    049.jpg
    122.2 KB · Views: 11
  • 050.jpg
    050.jpg
    125.1 KB · Views: 7

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
It is most likely 3hp. It isent worth much as it sits. Its not painted and most people need it to look persect, I would keep it for a backup go kart motor.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Have a look around the sheetmetal. There should be some model info located on there somewhere, and that will let us nail down the power rating and other info.
 

oldbikerarlo

Old guy
Messages
449
Reaction score
2
Location
Marana, Az.
Thanks for the info guys,

TS I can't find any #'s on it. Karl, It is a lot bigger than the 3.5 hp that I have, I rigged the pull start on it. and even the shroud is bigger. Kendelrk the plug is a champion cj8.
I do plan to keep it as a back up.
 

oldbikerarlo

Old guy
Messages
449
Reaction score
2
Location
Marana, Az.
Hey Russ, It is the original shroud, the recoil unit was all broken up so I removed the recoil unit from the shroud and welded on one from a newer 3.5 engine that has been reduced to parts. I did have to cut the shaft for the newer unit to work, but it pulls it over with no problems. The compleat # is 130292 0141-06 75110707
 
Status
Not open for further replies.
Top