Anyone have an 8Hp briggs carb?

Status
Not open for further replies.

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
Anyone? I need the up draft carb. Its the one with the elbow on it. Mine is shot, The Long Jet is stripped and so are the threads in the bottom of the carb, its not coming out. So i need a new one , thanks
 

Blazkowiez

Kart Aficionado
Messages
2,538
Reaction score
47
Location
Houston, Texas
Go to a local lawnmower shop that deals in these carbs, give him the engine model, series, family, etc. Dont say its for a kart, its on a pressure washer or something but you really like the design of the one you bring in to show them. Should be 80+ dollars.
 

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
None of my locals have a used one and a new one is 135 out the door which is out of the question
 

moetrout

New member
Messages
29
Reaction score
1
Location
Milan, MI
Let me check before I say. I have a few engines in my barn and I believe that particular one has a hole in the block. I can let you know this weekend.
 

theo

New member
Messages
872
Reaction score
1
If you are patient and good at tuning you can always install a 25mm motorcycle carb. I did on this 8hp but I had to work at changing main jets.




 

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
I think i saw a post of yours a while back when you did that.. Do you still have the orig carb? I need my governor to work, so that setup wont work for me =( Please let me know moetrout
 

theo

New member
Messages
872
Reaction score
1
The original carb was junk and missing parts, it's long gone. I did the carb swap several years ago.
 

moetrout

New member
Messages
29
Reaction score
1
Location
Milan, MI
Sorry solomon, my back is all jacked up right now. You'll have to give me a day or two. I'm on ice right now.
 

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
idc, let me know when you get a chance, might pick up a 8hp motor tomorrow.
 

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
moetrout, im hopping you have a carb, otherwise i might have to get a Tecumseh carb mounted to it.
 

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
I saw it, but that wont do any good coming in at $80 currently. I can buy a brand new one for $140. Im in a pickle
 

moetrout

New member
Messages
29
Reaction score
1
Location
Milan, MI
Solomon,

I got the 8hp briggs out, but theres no carb on it. I'll have to look harder but the fact that it is not on the motor means I really have no idea where it's at. I know I didn't get rid of it.
 

solomon

Active member
Messages
1,648
Reaction score
7
Location
ca
No worries moetrout, take your time. Thanks Kenny, im actually the one who bid on that haha
 
Status
Not open for further replies.
Top