Anybody know if a cat99 driven spring is the same a 30 series driven spring?

Status
Not open for further replies.

Kenny_McCormic

Kartless....
Messages
4,537
Reaction score
11
Location
Michigan Troll
Im assuming they are but would really hate to order one and learn differently, mine is bent because the retainer clip and what holds it on blew off, my jackshaft bolt and a couple washers now hold the driven together but the spring got pretty trashed when it came apart. That 19hp hirth 292cc single cylinder 2 stroke with a cheap cent clutch is looking better and better by the second, all I would need is a $30 carb rebuild kit.
 

pickledchang

New member
Messages
44
Reaction score
0
might as well go with the 2 stroke. id get rid of my 5hp briggs and tav in a heartbeat if i could find a sweet deal on a ~20hp 2 stroke, especially if it had a tranny with it!
 

Kenny_McCormic

Kartless....
Messages
4,537
Reaction score
11
Location
Michigan Troll
I have the tranny but the driver is bent and rusted together. I have decided to supercharge my 5hp with its own cooling fan and run it till it blows. Then the 292 will go in during the winter.
 

Shelton

New member
Messages
1
Reaction score
0
A 30 series built between 1986-1992 uses the same spring as a CAT99 but modern 30 series built after 1992 is different.
 
Status
Not open for further replies.
Top