Another torque converter question

Status
Not open for further replies.

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Riding my Baja today, was working great. Slowed down to turn and the TC seemed to "grab", made the bike really slow down. Went home slowly and realized that the driven(maybe? the part on the crankshaft) unit gets stuck when I slow down. I guess this is what people mean when it gets stuck engaged?

So to fix, I need to take it apart and clean it...the question is what do I actually clean? I had it all apart a few weeks ago, and the springs seemed to be nice and tight. What part is messing up on it? And how do I go about fixing it?

Thanks guys
 

Whitetrashrocker

Inmate #952016
Messages
5,235
Reaction score
4,731
Location
Southern New Mexico
I took the back half and makeshift an arbor for it. Stuck it my drill press and spun it. Took some fine sandpaper and gave the slip shaft a cleaning. The arbor doesn't have to be perfectly true but close.
Then a flap sander on the insides of the outer half. Don't get crazy and take out several ten thousanths but just enough to get rid of the marring.
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Ah you think it might be the back part of the TC that's not working?? I don't have a drill press but interesting you think it's the back part.

I just took apart the part on the crankshaft, the springs still are tight. One looks a TINY amount crooked, but I cant imagine that's the issue!! I guess if the back half wont shut the front half can't close all the way? I will have to go look at that. Hesitant to take it apart because it seems more complex!
 

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
just rambling here, but here goes:

weight pack and hub of drive unit (on crank)


make sure the weight pack has the studs in it straight, they could be bent, causing it to engage wonky, but most likely its the hub that might have some gunk it in preventing it from sliding back to its position. If you think of it, the springs, weight pack, studs, and hub all have to work together to let the moveable sheave slide in and out, so it has to be one of those. Also, the weight pack and at least one surface on the hub (either moveable sheave part of hub, or the actual hub that slides over the crank) needs to be sprayed with a light coat of dry moly (or dry graphite). The hub could have some gunk or rust in it preventing it from sliding in and out. Also, some people have been known to install the weight pack BACKWARDS.

This should help

https://www.youtube.com/watch?v=C9yPHtfJO9w

very good video here
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Good info! Thank you ^^


I think I figured it out.

The rear driver seemed to be the issue after looking at the whole thing while driving it.

The plastic/rubber parts on rear part broke. Is this fixable? Didn't know this could even happen (or why?). I guess I can take it apart and get new rubber things, or will I need a whole new unit? I would rather fix it than get a new one as they are rather pricey

Thanks for all the help guys


The left pic shows the difference between the one from my go cart (with red springs) and the Baja TC, on the right side of the pic, with green springs. You can see how the top part is now in beteeem the rubber things
 

Attachments

  • IMG_8242.jpg
    IMG_8242.jpg
    301.5 KB · Views: 4
  • IMG_8243.jpg
    IMG_8243.jpg
    226.2 KB · Views: 2

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Sorry for the delayed response! I will definitely be trying to replace the worn ones soon. Need to get a snap ring remover first! The link had a good video on how to do it too. Thanks
 

Panhead5496

New member
Messages
908
Reaction score
7
Location
Athens, Georgia
Just a quick update, got my snap ring remover today. Took it (the rear part) apart and it was very dirty. Whoops haha. Cleaned it up and swapped the rubber inserts. Put it all back together and works like new. Thanks for the help everyone!
 
Status
Not open for further replies.
Top