An Idle problem

Status
Not open for further replies.

AlphaRunner85

New member
Messages
111
Reaction score
1
Location
Hendersonville NC
Pre-thanks for any help on this. I have a gokart with a
5 hp briggs funpower with a diaphragm carb and i will only idle at half choke. ive adjusted the idle screw almost to the point of removing it the diaphragm is in good shape and barely a year old. the screen on the long dipper into the gas tank is clean and the stubby bit that looks like a valve of some kind looks in good shape also. im workin on pics that would probably help.
 

AlphaRunner85

New member
Messages
111
Reaction score
1
Location
Hendersonville NC
I did and it flows pretty well for the size of em.
As best as i can tell everything flow pretty well.
I dont know if my particular carb has a float
and when i stripped it down the first time i
didnt see a float and there are no loose parts
in the tank.
 
Last edited:

EagleTalons

Master JB Welder
Messages
1,100
Reaction score
5
Location
Forsyth, Montana
Your carb doesn't have a float, it get fuel it pumps it with the diaphram from the tank to a small bowl where it then pulls it into the carb. To keep it from forcing too much fuel into it, it has an overflow.

Does it run without choke at WOT?
 

lerick

New member
Messages
15
Reaction score
0
i have the same prolblem with a robi weedeater engine 31cc it will only run at half choke you take choke off it kills it
 

Kaptain Krunch

Pro Junk Collector
Messages
4,636
Reaction score
6
Location
vermont
it needs more fuel...bigger main jet. thats why i hate the epa, if only engines could still have hi and low speed adjustments.
 

AlphaRunner85

New member
Messages
111
Reaction score
1
Location
Hendersonville NC
So have ya ever just wondered how some people can just touch stuff and make it work? I stripped the carb down and cleaned it twice, and adjusted everything i could find and My neighbor fiddled with the @$#^%$ thing for TWO min and it runs like a freaken race car.
 
Status
Not open for further replies.
Top