Eric Bland
New member
Can anyone confirm if the CDI on my 2011 American Sportworks Trail Wagon 200 (TW200) is AC or DC? I am not getting a spark, and I’ve replaced, the spark plug, the stator, the starting coil, the staring relay, the voltage regulator and the CDI. I have read the "GY6 150cc Ignition Troubleshooting Guide: No Spark?" but I don't have the kill switches, and cant really tell if the same trouble shooting steps apply to my buggy since it seems to be DC... my CDI did not have the 4 & 5 wires, so I assume it is DC. In which case, is there a troubleshooting method specific to DC CDI's?
For background, I received the buggy from an in-law who was about to junk it, it hadn't ran in years. The engine turns over just fine, and fuel is getting to the cylinder, and the battery has 13v.
Please help...
For background, I received the buggy from an in-law who was about to junk it, it hadn't ran in years. The engine turns over just fine, and fuel is getting to the cylinder, and the battery has 13v.
Please help...