am i gonna burn up my clutch

Status
Not open for further replies.

cumminsbayou4x4

New member
Messages
829
Reaction score
3
Location
fairhope alabama
im running a stock 212cc predator with the throttle screw all the way out,10in tires, 40 tooth sprocket on the tires and a 10 tooth on the clutch iv so far only ran it about a mile and it flys and i want to know if I'm gonna burn up the clutch
 

zip kart

New member
Messages
449
Reaction score
0
Location
ireland
i have a honda gx160 on my kart with 51t on sprocket and 11 on clutch and 10in racing slicks and it runs fine ,also its a racing kart frame so its light so id say how heavy is your frame
 

Doc Sprocket

*********
Messages
15,677
Reaction score
151
Location
Ontario, Canada
im running a stock 212cc predator with the throttle screw all the way out,10in tires, 40 tooth sprocket on the tires and a 10 tooth on the clutch iv so far only ran it about a mile and it flys and i want to know if I'm gonna burn up the clutch

Drive around for a few minutes like you normally would. If clutch is too hot to hold onto, then it's too hot.
 

cumminsbayou4x4

New member
Messages
829
Reaction score
3
Location
fairhope alabama
the clutch got to hot already with the 60 tooth on it and that one is stock its not a hevy gocart the frame shouldnt be but like 50 pounds I'm like 130
 

OzFab

Well-known member
Messages
15,615
Reaction score
73
Location
Warwick Qld, Australia
It's gonna get hot no matter what you do. My daughters kart runs at around 13:1 & the clutch still gets hot, friction will do that but, there's different degrees of hot ('scuse the pun); the harder it works, the hotter it'll get; the hotter it get, the quicker it'll die.
 

cumminsbayou4x4

New member
Messages
829
Reaction score
3
Location
fairhope alabama
it gets hot really hot like i touched it with the 60 tooth on it and it all most burnet me so what should i do the clutch has all was did this so should i run it with the 40 tooth or put the 60 tooth on it even when. see i got this gocart when i was 4 it was my first one and it had a 5hp briggs to start with and i all was rember the clutch being hot when i would touch it when i ran it with no chain gard it had one but as i got older i started to relize i need to oil the chain and clutch and some reason i didn't put it on there we ran the stock clutch from 2001-2010 with may be 1000 hours on it so is it the clutch just being dumb or my gearing or what
 

gixxerkart

Big Boss
Messages
240
Reaction score
0
Location
high desert
 
Status
Not open for further replies.
Top