ah man

[dframe]

so i finally found my go cart project...after 2 frames and lack of motivation.

A friend of mine gave me an old frame that hes just had setting around...the serial number is 60501x92 I have no clue who makes it. Ive never seen anything like it, but i would like to see one complete. Its a one seater, big frame...more dune buggy than go cart.

I need help though. i have a 10 hp tec. motor that im planning to use. Im guessing a centrifugal clutch will not last, so does that mean torque converter? Do i have options? any help/advice would be awwwwesome. thanks

 

[down_in_flames]

A torque converter would be the best way to go

do you have pics of the frame

 

[Kenny_McCormic]

Pictures help!

 

[dframe]

so my cousin took some pictures...but only one of them emailed to me correctly so far, of course it is the worst picture of the cart itself...but may help to show you the clearance im working with, and the torque converter situation...more pictures will come

 

[03BLACKGT]

Looks a little like a thunder kart.

 

[dframe]

more pics, cell phone quality. One is showing the throttle situation.

 

[dframe]

so here is my update...being partial business owner with my pops means ive been working 16 hour days, during lunch i took some measurements...the input shaft is 1", the axle is also 1 inch. the current sprocket is 3 tpi - .25" steel.