AlexBatres86
New member
- Messages
- 12
- Reaction score
- 2
Thanks for the advice, I’ll probably just thread my own rods, I have a decent die nut set for it.ok ...I built the spider kart " arachnid"...buy a solid rack and pinion from "nex Gen offroad" their racks are built for off road dune buggy racing.
They are about $100.....anything much cheaper will be crap and probably break
you can buy heim joints from a hardware store, amazon, or any of the go kart places,, ( BMI, Go power, OMB, NR Racing, etc)..tie rods from 3/8 inch "allthread",
or thread your own 3/8 inch rods.......all pretty simple. Search the go kart suppliers like the bible, until you know what they carry, and what you need. This ain't a cheap project, so spend what you need to do it right, and you'll not be sorry !
Da Flash
This is what it looks like thus far, long way to go yet.
thanks again.