_Torque converter replacement_

Status
Not open for further replies.
D

doggerss

New member
Messages
51
Reaction score
0
You need to know the length of the origianal belt to be sure but I do know most tag 30s had a backing plate that set the length of the belts. If you have the backing plate on yours it prologue will fit yours thought
 
jamyers

jamyers

Well-known member
Messages
1,444
Reaction score
47
Location
Buffalo Gap, TX
Aside from the length, it also needs to be an assymetrical belt with iirc 18* on one side and 2* on the other.

Probably best to email Northern directly and ask for specific specs on it.
 
J

johnt98

New member
Messages
51
Reaction score
0
JH Pinoy said:
I have a tav 30 series torque converter for my go kart. I was wondering if anybody could tell me if this belt will work fine as a replacement belt. thnx

http://www.tractorsupply.com/masters-of-motion-trade-30-series-torque-converter-drive-belt-5520055

Edit** The length of this belt is 28in. I'm not really sure of the length of the original belt.
Click to expand...

wow thats crazy, I was just at the store - I live in Sacramento. and they do sell belts but none of them will work for your torque converter. they were all too skinny and not asymetric belts. I probably would not buy them unless you can see them for yourself. Save you the hassle of shipping back and forth.
 
Status
Not open for further replies.
Top