9 horsepower electric start stretched ATV

[hardcorewill]

 

[BaconBitRacing]

This gonna be good. I can see the craftsmanship, I appreciate attention to detail a whole lot. Purdy!

 

[hardcorewill]

going to weld the 10 tooth on the back of the jackshaft . That way I can run the chain down the middle of my bike . mail call!

 

[Denny]

Or you could just cut a new key way in the shaft and do it right.

 

[hardcorewill]

BE the motor DENNY!!!and stop drinking haterade!!!

 

[BrownStainRacing]

That's a stepped shaft and sprocket won't fit over that end. Reason for welding???

I've seen stock pred 212's on mid sized 4 wheelers, they were dangerous.

I say you gonna have your hands full with that 1,

 

[Denny]

BE the motor DENNY!!!and stop drinking haterade!!!

I stand by my statement. Nothing hateful about it at all nor was it mean. If you weld it and something goes south then your stuck.

 

[hardcorewill]

more beer than work today heat , shield made.

 

[hardcorewill]

That's a stepped shaft and sprocket won't fit over that end. Reason for welding???

I've seen stock pred 212's on mid sized 4 wheelers, they were dangerous.

I say you gonna have your hands full with that 1,

 

[hardcorewill]

Correct will have to grind down the Jack shaft to fit the 10 tooth.

 

[hardcorewill]

Basically Parts keep coming in I modify them and build the bike

 

[hardcorewill]

 

[hardcorewill]

Okay I might have attention deficit dis something something

 

[BaconBitRacing]

Okay I might have attention deficit dis something something

Not a problem when you’re making a sick mini bike and carrier. Maybe have a friend drive the golf cart and scout ahead with da bike? So many options!

 

[G.W]

I

This gonna be good. I can see the craftsmanship, I appreciate attention to detail a whole lot. Purdy!

IF ya like purdy, hers my gas powered bike...

 

[Denny]

What’s the blue car?

 

[G.W]

What’s the blue car?

57 Ford Fairlane 500 four door

 

[G.W]

Ya know I thought about one of the 440 duromax engines for my kart, but I ended up with the 459 pred from HF

 

[hardcorewill]

Going to chop this up make it fit a big tire currently only has 6 in between post.

 

[hardcorewill]

Chop chop