8 hp engine

Status
Not open for further replies.

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
i just picked up an 8hp Briggs and stratton for free the only problem is it has no carburetor. i cant find a used one on the internet and a new is about 150.00. can i put a 8 hp carb from a Tecumseh on it?
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
i cant find one. The size, does it go in millimeters? for example, when you see like walbro 32mm carb is that the size or?
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
Is it a horizontal-shaft 8hp? I'm rebuilding one (190000 series) right now, and would be happy to measure whatever you want off my stock carb.

(Or if you can't find a carb I'd be happy to take that engine off your hands, lol!)
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
yes it is horizantal and its a 190000 series i would apriciate it if you would mesure it. i found the carb for it for about 25 bucks so i plan on buying it. but if i dont i would love to know the size. Thanks
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
i happen to have a really nice clean 8hp briggs carb. only thing is you need a gasket (the one that splits the carb apart)

id sell it for $10 and shipping. but id go for the $25 one as a first option lol. because the price of a gasket and shipping will leave you at like $20 total, and mines been taken apart so i cant really guarantee it

i ran this carb on a 6hp tecumseh
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
yes it is horizantal and its a 190000 series i would apriciate it if you would mesure it. i found the carb for it for about 25 bucks so i plan on buying it. but if i dont i would love to know the size. Thanks
My Briggs / Walbro LMT sidedraft carb has a 1 inch bore, with a .75 inch id venturi.

Note that older 8hp engines came with an updraft carb, like this one.

Mine looks like this one. Actually, $61 ain't bad for a new one.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
thats much more than id pay for a carb... i got a almost new Walbro LMK for my kohler $25 shipped

ebay is awesome
 
Status
Not open for further replies.
Top