6" vs 7" driven clutch

Status
Not open for further replies.

Pickle

New member
Messages
17
Reaction score
3
Going to order the comet 20 series parts that I need for my go kart. It had a 6" driven on it but I'm considering getting a 7" driven for belt sizing purposes. Will going from a 6" to 7" driven make it go slower or faster?

Also do the Chinese clutches work as good as Comet stuff or are they unreliable?

Thanks
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Bigger Driven means more crank revolutions required to turn the jack shaft.
Bigger driven is for more torque.

You will accelerate faster.
Top speed??? Not sure what the final ratio is for each the 6" and 7" 20 series Drivens.
You can probably look that up. Comet has some good info available.

I would guess same or slower top speed.
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Chinese TCs seem to be just as good. Most here use them.

---------- Post added at 08:41 PM ---------- Previous post was at 08:37 PM ----------

Looks like the smaller has a final ratio of 1.15 and the bigger has final ratio of 1.4.
Bigger = slower
 

2SlickNick

American Minibikes @ FB
Messages
2,758
Reaction score
32
Location
Mesa, AZ.
I have 20 series 7" driven for sale
I could probably sell driver too.

---------- Post added at 07:58 PM ---------- Previous post was at 07:54 PM ----------

App.kartcslc.net

For all your ratios.
 

Pickle

New member
Messages
17
Reaction score
3
Well darn it. I just bit the dust for $186.80 for both Comet clutches and a Comet drive belt.

Just need to get a can of clutch lube and figure out how the secondary attaches to the jackshaft. Obviously the keyway but how do I keep it from floating on the shaft?

Thanks
 

Attachments

  • image.jpg
    image.jpg
    89.7 KB · Views: 9

Pickle

New member
Messages
17
Reaction score
3
She does 18mph with the 7" converter and gets there in a snap. Plenty for what I wanted out of it. Thanks for your help.
 
Status
Not open for further replies.
Top