6.5 clone fuel tank question

Status
Not open for further replies.

Mikeythai

New member
Messages
48
Reaction score
0
I have a new 6.5 HF engine that I will put in a kart I'm building. I'm want to mount the gas tank off to one side and a little higher than the engine.

So if the tank is higher than the engine can I get rid of the fuel pump and return line to keep things a little simpler/cleaner?
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
since when did a stock HF engine have a fuel pump? in stock form the gas tank is already above the carb, eliminating the need for a fuel pump.
 

Mikeythai

New member
Messages
48
Reaction score
0
I thought that rectangle black plastic thing with fuel lines going in and out of it was a vacuum fuel pump?
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
is your engine setup like a race kart engine? in that case it might have a fuel pump, but would also mean its not stock. what your describing does sound like a fuel pump.

anyhow, that doesn't matter much, if you mount the tank so it is above the carb you can eliminate the pump.
 

kendelrk

redneck engineer
Messages
2,425
Reaction score
9
Location
westland michigan
a fuel pump is simply to pump fuel from below the carb, if a gas tank can be put above it can be eliminated due to the gravity feed
 

Mikeythai

New member
Messages
48
Reaction score
0
This was a bad question, I think. I'm pretty sure that thing isn't a fuel pump. Thanks for replying, though.
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
is this what your talking about?



or the black plastic rectangle on this?

 

Mikeythai

New member
Messages
48
Reaction score
0
I was wrong. I just had this sitting on my workbench and was confused. I put it back on the engine and now see it can't be a fuel pump.

I think it's called a deposit cup.

 
Status
Not open for further replies.
Top