5/8 clutch

[nealolsen]

Is there a 5/8 clutch with a set screw? My briggs 2hp has a straight shaft and is not threaded to use a bolt to hold on the clutch. Any help would be great already ordered on and there was no place for a set screw.

 

[anickode]

Drilling and tapping the end of the shaft for a bolt isn't really that difficult.

 

[txluke]

Here is my 2hp. I ordered a clutch with set screws from Amazon but they sent me the one without. Got the one with set screws from Ebay. That is what you need.

 

[nealolsen]

Would a 5/16 bolt be good enough, with the key way there isn't a lot of thickness left.

 

[anickode]

1/4" would probably be sufficient. It's just keeping the clutch from sliding over.

 

[nealolsen]

I just drilled and tapped a 1/4 bolt. You guys were right it was easy.