4hp Kohler k141

Status
Not open for further replies.

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Thats quite cheap. I would go for it if the old one is not fixable.
I second (or third) on the flywheel. Try and find a new one.
To clean the carb you could try lots of caustic soda in hot water for a few days.
Rob
Edit: toystory beat me to it :)
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
ok so i found a new flywheel on ebay for aprox. 20 bucks, and if the tins and cylinder head cost me 20bucks also thats already 40 bucks that im gonna have put into this engine and i still run the risk of it not working. i dont think ill be buying a new flywheel anytime soon. is this engine strong? and worth repairing?
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
That's a matter of personal opinion (worth rebuilding). How far are you willing to go to maintain the originality of the kart?

As far as not working goes, it will work. Depends on how much time/effort/money it needs.
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Could you not bodge the cylinder head for now by jb welding in a spark plug and leave the flywheel, then get it working and buy the parts?
Rob
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
toystory- i dont really care about keeping the originality of the engine, i would much just prefer to get it running for as cheap as possible

rchez- i cant weld
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Then for what it's worth, between the flywheel, carb, and head (and god knows what else) you might be better to shop for another cheap engine in running order.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
jb weld is an epoxy-glue.

IMO, if you arent going to do a full restoration (sandblast parts, nice and clean), not worth fixing.
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
well for now its all i can get my hands on so im gonna make the best of it.

anyways.. my dad is still convinced that we can find that header at a local shop and so he wont let me order the ebay one
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
^^ yeah thats what i meant :p. our local harborfreight sells their refurbished 6.5hp clones on craigslist for 50.00 bucks!!! they have a warehouse full of em you can just go and pick out the ones you want. when i get some more cash
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
ok so today i got some work done. what i did to solve my sparkplug problem was take some pliers and tear out the rest of the threads from the cylinder head. i realized that it was threaded still so i used some thread tape and wrapped the end of the sparkplug in that and screwed it in to the head. its a little loose but itll hold. :useless: So i took some :)
 

Attachments

  • Photo-003jm.jpg
    Photo-003jm.jpg
    75.7 KB · Views: 2
  • Photo-0023.jpg
    Photo-0023.jpg
    62 KB · Views: 3
  • Photo-0024.jpg
    Photo-0024.jpg
    63.4 KB · Views: 3
  • Photo-0025.jpg
    Photo-0025.jpg
    73.8 KB · Views: 4
  • Photo-0026.jpg
    Photo-0026.jpg
    87.8 KB · Views: 3
  • Photo-0031.jpg
    Photo-0031.jpg
    61.1 KB · Views: 3
  • Photo-0030.jpg
    Photo-0030.jpg
    60.5 KB · Views: 2
  • Photo-0029.jpg
    Photo-0029.jpg
    57.3 KB · Views: 2
  • Photo-0028.jpg
    Photo-0028.jpg
    55.8 KB · Views: 2
  • Photo-0027.jpg
    Photo-0027.jpg
    68.5 KB · Views: 2

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
heres some more
 

Attachments

  • Photo-0032.jpg
    Photo-0032.jpg
    67.8 KB · Views: 2
  • Photo-0033.jpg
    Photo-0033.jpg
    64.4 KB · Views: 2
  • Photo-0034.jpg
    Photo-0034.jpg
    68.2 KB · Views: 3
  • Photo-0035.jpg
    Photo-0035.jpg
    61.8 KB · Views: 3
  • Photo-0037J.jpg
    Photo-0037J.jpg
    50.4 KB · Views: 2
  • Photo-0038J.jpg
    Photo-0038J.jpg
    66.5 KB · Views: 2

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Well, you can try it, but if it's at all "loose", you run the risk of tossing the plug (and the remaining threads). Compression may suffer too. The spark plug would probably make a pretty impressive projectile...

Did you manage to get the choke shaft freed up?
 

j.concepcion54321

Rebuilding KTM, Need Kart
Messages
1,251
Reaction score
5
Location
East Providence RI
no i didnt get the choke freed up. i actually broke off the little butterfly arm trying. i told my dad that maybe some heat would loosen it up but i figured it was a bad idea since the carb was covered in wd-40 :)
 
Status
Not open for further replies.
Top