440 Arctic Cat Sled engine

Status
Not open for further replies.

Reltach

New member
Messages
4
Reaction score
0
Recently bought a custom cart, rides nice and was fun, but i can't *not* change it, right? Anyway.... I'm not really sure where to start with this engine. As far as I've been told it is from a 1978 Arctic Cat, and that it is a 440cc.

I'm trying to figure out a decent way to add lights. Alright, adding lights has been done, the part I'm stuck on is powering the lights. I could toss a battery on there and power them directly off of that.. but people keep telling me that I should be able to power them directly from the engine. They throw out words like Magneto and CDI, All i can think about is Magneto from X-Men and CDI is where my work purchases chemicals. Unfortunately these people won't give me any other information which leads me to believe that they really don't know exactly what they're talking about; Or at least aren't very confident about it.

A lot of what I am trying to accomplish right now is figuring out *if* the engine is capable of powering lights on it's own or charging a battery or something along those lines. If it can, I'll likely have to take it to someone else to actually do it. Unless it seems simple enough, I've learned the hard way in the past about failing too many times in a row that something is so mucked up that a profession has a hard time dissecting what I have done :p

I'm not an engine guy.. never have been. So any pointers as to where I should be looking would be great. Any good diagrams of similar engines on the web? I've read through a lot of threads on this forum but haven't really gotten anything too useful on this topic so I hope I've asked my questions correctly.

Once again, thank you, Pics coming soon.. going to go take them now.

Robert















 
Last edited:

bighead

New member
Messages
4,022
Reaction score
54
Location
Pacific Northwest USA
To start thats a fan cooled engine. You are missing the shrouds that go around the engine.

That engine will have a power coming out of it. Find the wires coming out of the engine. Use a test light and see if you get power to any of them when you turn it over. If not power from any of the wires. You could have a bad lighting coil inside the engine. YOU ALSO NEED TO FIND OUT IF THIS SLED ENGINE HAD A VOLTAGE REGULATOR BEFORE YOU HOOK UP YOUR LIGHTs. If not you will blow them. You will blow your test light as well. I am willing to bet $50 it had a voltage reg. on the sled. Again pull the plug so it cannot start and easy to pull. Find the wires coming out of the engine. Use a meter on each wire until you get power as you pull the starter rope. Chances are you will find a wire coming out of the engine that is not used. Thats probably the wire your looking for. If not test

Thats got to one loud kart man. Talk about open headers. Love it.

You have a really nice Comet Duster clutch. They are not cheap......

I would find the tag on the motor. Post that info and do some looking into. You need to find out what kind of sled that engine was originaly on. Pretty much every sled has a head light.
 

Reltach

New member
Messages
4
Reaction score
0
I've been all over that thing, the only information I can find is on the Comet duster, and much of that is scratched off.. I'll make sure to look harder when I go out there later today; Maybe it's under a chuck of mud. As far as I know, it was from a 1978 Arctic cat, that is all the info I could get, so I'd guess the guy I got it from got the engine second hand and never actually had the sled.

I'll take a silly assumption to look closer to where the kill switch wires come out for any other wires. You can kinda see them coming out in Pic #3 of the first post. Just wish a had a DC test light now :p

I have the muffler taken off because I'm doing some work on the frame. Had i noticed this before purchase I would NOT have gotten it...


Why anyone would do that to the frame i have no idea. Seems easier to me to modify pretty much anything else. Even raising the engine a half inch to an inch would have made more sense.
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
lol

it took me a while to get it

if i was in your situation

id totally strip the kart
clean everything
service the clutch and engine
check welds and look for weird stuff like above

also u may wanna look into getting some mufflers

stripping it will teach u alot and proberly improve performance


look at bigheads fabrication thread

in his he found someone used wood and electrical tape
 
Status
Not open for further replies.
Top