212 predator

Status
Not open for further replies.

Cmc2873

New member
Messages
1
Reaction score
0
Plz help. I have recently built a minibike and added a 212 predator motor the motor ran great with me and my son taking turns riding it ran for about two weeks then I was kind a showing off for my sons friend and flip the bike going up a hill I busted my *** and the bike hit the ground stalled and has not started since it has gas,spark,and oil is full. I've pulled and pulled and cannot get it running and that's been over a month ago any ideas
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
98
Location
U.S.A.
Check the flywheel key. You might have broke it. Take starter cover off and the center piece on the flywheel key and see if the flywheel is still lined up with the 2 grooves properly.
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Hello and welcome...

Well that leaves a big gap for on what to diagnose.... pics if you can.....
Where did it land on.... was there any contact with the motor or just on the frame of the bike...
Check for spark and compression....
If it might have landed on the carb area... it might have damaged the carb enough to let air in more so than is needed as not allowing a complete combustion cycle to occur.

It might have a block crack you didnt noticed causing an interruption to occur.

One last thing off hand..... if no spark, check the coil gap... needs to be about 1 buisness cards thickness away. It might have been jolted loose a bit causing no spark.
 
Status
Not open for further replies.
Top