Newb. Had no problems with the engine last summer, recently I picked up a stage 1 kit (with jets) and when I’ve been running it, after about 20 minutes, the engine starts to cut out, and can’t be restarted without waiting a while.
I don’t know if this is related, but its currently about 40F out, when I didn’t have any problems running it, it was around 70F.
Ive seen some things about air density in the cold, but not sure if it would make a difference here.
Didnt see anything lodged in the jets, and gas flow into the carb shouldn’t be a problem either, as the gas tank is vented well.
If anyone’s had a similar problem or can diagnose exactly what’s causing this, that’d be helpful!
I don’t know if this is related, but its currently about 40F out, when I didn’t have any problems running it, it was around 70F.
Ive seen some things about air density in the cold, but not sure if it would make a difference here.
Didnt see anything lodged in the jets, and gas flow into the carb shouldn’t be a problem either, as the gas tank is vented well.
If anyone’s had a similar problem or can diagnose exactly what’s causing this, that’d be helpful!