208R New Belt slow down
- Thread starter freakyhog
- Start date
- Status
Denny
Canned Monster
Now look for a Genuine Comet belt with that center to center distance.
Denny
Denny
420Racer
Rip It Up
Something isn't right here. You took the old belt off it was shredded......but it worked and you could see the numbers on the belt.....when you removed the belt did you do anything else besides slide it over the pulleys or did you mess with anything else? You should not have had to mess with anything else to get the belt off so that's why I'm asking
Looks like you need this belt if it is a 6" pulley
Attachments
-
Capture.JPG
203590 is the belt I show that I need too.
I didn’t do anything else besides put the belt on.
I really think now that I’ve found this that the wrong belt was put on it to begin with. It was definitely a 725. I never rode it until it probably had 20 hours on it or so. It would barely get into overdrive seemed like it struggled to get in there. Once it did it was fine. I believe the 725 stretched just enough to let it go into gear. Could also explain why the belt shredded so fast.
I didn’t do anything else besides put the belt on.
I really think now that I’ve found this that the wrong belt was put on it to begin with. It was definitely a 725. I never rode it until it probably had 20 hours on it or so. It would barely get into overdrive seemed like it struggled to get in there. Once it did it was fine. I believe the 725 stretched just enough to let it go into gear. Could also explain why the belt shredded so fast.
- Status