125cc in a 110cc

Status
Not open for further replies.

stevens319

New member
Messages
5
Reaction score
0
Location
MA
I recently bought a chinese 110cc kart on cl for 50$ what a deal. The engines been nothin but.problems since i got it i had it runnin a few times.enough.to.beat on it.but i.think i finally gave it.its.last hoorah. So ive been lookin on ebay and other sites and i can get a 125cc for around 250$ probly not the.best quality but hey better than the junk one thats in it so my question is would a 125cc fit in the 110ccs place without fabrication? The mounting holes.look the same.but i cant find any site that can answer my question. Any help would be great thnx
:cheers2:
 

DS13

Annoying the Neighbors!!!
Messages
437
Reaction score
0
Location
Elysburg, PA
1. You could measure the mounting bracket for your engine and then see if the site have the same dimensions.
2. Find the engine's website, find the specs/ parts diagram for each engine.

3. If neither are possible there will probably be fabrication involved... (most likely answer)

If ya want more help you'll have to give us more info and maybe some pics and links.
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
Anything's possible with the right tools :D

Absolute worst case, it'll be close so, you might need to move a mount or two...
 

jamyers

Well-known member
Messages
1,444
Reaction score
49
Location
Buffalo Gap, TX
If its the same type of engine (GY6, E22,etc), the mountings should be same-same. Of course, with the Chonda's you never know until you get it in your hands.


Sent from my iPhone using Tapatalk
 

stevens319

New member
Messages
5
Reaction score
0
Location
MA
Hopefully the link works. My phones not lettin me upload a pic so i had to paste the link. The engine in the pic is a 110cc ching chang engine, its the same engine thats in my kart now. I measured the mounting brackets on my kart and theyre 6" on center from the two mounting bolt holes and about 3 1/4 wide. I cant find a website that tells u the mounting dimensions for a 125cc, i guess they just expect u to know. What i really wanted to do on his thing was.to put a.420cc harbor freight engine on it but by the time i bought that plus.a.torque conver a belt chain etc, then figured.out how.to mount it id be spending waay more than i would want. So i figured.the 125cc would.give me a bit more speed for a lot less $ and without all that fabrication. Considering the only.thing ive ever welded.was my truck exhaust tips and the welds looked like gobs of peanut butter!
 

Attachments

  • 500.jpg
    500.jpg
    116.5 KB · Views: 1
Last edited by a moderator:

stevens319

New member
Messages
5
Reaction score
0
Location
MA
Thats what i was thinking/hoping. Guess worst case scenario i have to make it work. Now i can get a 125cc auto w/ reverse or a semi auto w/ reverse RN123, or just an auto no reverse. Any opinions on which would last longer with no problems? Cuz i heard the clutches in them "chondas" wear out pretty fast
 
Status
Not open for further replies.
Top