1" shaft

Status
Not open for further replies.

jim454

New member
Messages
25
Reaction score
0
I have a 8 H.P. Tecumseh with a 1" shaft.I now have a custom belt drive system,but would like to put a clutch on the engine but it doesn't have any threads in the end of the crank. Has anyone drilled and tapped a 1" shaft with success.I am thinking of making a guide to drill and tap it out?Thanks:huh:
 

jim454

New member
Messages
25
Reaction score
0
Russ where did you get that clutch?Is that a 3/4" shaft or a 1"
 

jim454

New member
Messages
25
Reaction score
0
Thank's Rusty now I just have to save up for the clutch.My son is very happy!
 

jim454

New member
Messages
25
Reaction score
0
Belt drive

$14.00 For a belt ,they usually last 1 season.
 

Attachments

  • Coats-Moriarty 4-H Camp-go kart, misc. 002.jpg
    Coats-Moriarty 4-H Camp-go kart, misc. 002.jpg
    89.1 KB · Views: 7
  • Coats-Moriarty 4-H Camp-go kart, misc. 007.jpg
    Coats-Moriarty 4-H Camp-go kart, misc. 007.jpg
    74.1 KB · Views: 7

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
can i make a surgestion

it is recomended that the belt is tensioned inwards so if u make the tesioner come from the other side and make it push the belt in it basicaly means that there is more belt touching more pully at any one time and this will help belt slippage
 

jim454

New member
Messages
25
Reaction score
0
There isn't any room on the other side .This is the only way this will work on this set-up.For now it is O.k..I only have the engine at 5/8 throttle and it really moves.I will get a clutch eventually.When this thing winds up it will go fast.I had to slow it down for the kid's
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Same idea as belt drive in a snowblower. If you hve ever looked under the cover its just like that. Pull the lever and the belt tensions.

One season though? My neighbors snowblower i use for them when theyre on vacation is at least 20 years old and im pretty sure its all original.
 

jim454

New member
Messages
25
Reaction score
0
Did anyone ever sit on the snowblower when they were snowblowing the driveway?
 
Status
Not open for further replies.
Top