Search results

Making it work with this axle is the tricky part. I should have done a little more research first.

Ok thank you

I still have a lot of work to do. I’ve got almost all the bits and pieces collected to start welding the engine plate and hanging the axle. Just gotta figure out the final drive and find the time to put it all together.

Looks like around 300# plus driver and passenger. Tillotson 212 with a chikuni 26mm and a header. And the tires are 16” Here are some pics. Off road suspended cart. Thanks 😀

I picked up an axle kit from eBay for the zircon 150 refurb/retrofit. It came with a 37 tooth sprocket and #530 chain. I can get a front sprocket for the 30 series (10 tooth) or get #420 chain and try to find the right sprocket or split sprocket adapter. Not sure what to do, put it together and...

Yeah the axle was trashed. The left rear wheel snapped off at some point because someone welded it back together. (If you zoom in to picture 4/5 down on the floor next to the atv jack is the hub on the floor) The bearing on this side is also destroyed. Went on eBay and ordered a kit. I probably...

I got this kart for essentially free. Can’t get the engine going so I am swapping it to a stage 1 Tillotson 212 with a 30 series. Looks like i ordered the axle 2” too big and i will have to widen the rear and to accommodate. Welder will be here some time today 🤑

Just watched your video, looks like you’ve got everything dialed in perfectly. Not sure what you mean by revision 1 or 2 but your tc is grabbing right away and that’s what I want as well. I did go ahead and install the vm22 copy today and like the throttle control much better. That was after I...

I was watching a YouTube video and realized what I did… I INSTALLED THE DRIVER WITH THE WEIGHTS FACING THE BELT. 😑😂😂 Went out and installed correctly and took it for a ride. WOOHOO this thing rips! Tomorrow I’ll finish putting the plastic sand headlight. The first 20-30% of throttle is pretty...

Yeah they’re already fighting over it 😂

yeah that nut was really tight I did loosen a bit. I’ll try a little more and double check the throttle cable. It sounded like the governor was kicking in. I’m calling it a night and will pick up in the morning. Thanks for your help, I’ll keep researching.

Yes throttle stop is turned out as far as it can go and not fall out. Looks like I need to add a throttle return spring cuz I have to force it back to idle. I already have a vm22 ready to install but I wanted to try it “stock” first. Maybe I should just install it? Will it make a big...

Ok here’s what the driver looks like inside

Yes belt is in correctly, flat side toward engine. I will go pull the driver.

Hello and thanks in advance, I just put together my first mini bike and I don’t think the TC is working right. Only goes 10-12 mph. Will you take a look and see if anything looks out of the ordinary? https://youtube.com/shorts/MYWrWXh81xk?feature=share thanks again! J

Hey all, i just bought my first mini bike, a Mega Moto 212 kit w a stage 1 Tilly from gopowersports. Keeping my eyes peeled for some used ones also as I have 5 kids I will be building for as well. J