Search results

Im selling my engine and the guy from craigslist asked "What size is the bore" "What size is the clutch" and "what size is the chain" Im not sure on any of these so here are some pics, hoping you guys could help me out.

I got a custom built go kart off craigslist and needed some work. i have fixed everything but the last thing i was going to do was bleed the brakes. i poured the brake fluid then noticed it would slowly start getting wet under the caliper and leaks from there. Im not familiar at all with brakes...

Just traded my pocket bike for a go kart with 11hp tecumseh. I have no clue as to how the throttle cable needs to be hooked up. Any help?

First off: i wasnt too sure if this is the right section to be posting this or if it should be in the sale and trade section because im not putting something up for sale or trade..So anyways lets cut to the chase..Someone wants to trade me a go kart for my 49cc pocket bike that i have (which...

So today while going down my street i came across a dip in the road and my front wheel ended up going through it and it completely broke the bearing and the nut holding the wheel flew off then the front of my go kart hit the ground and launched me like 3 feet up. Luckily when i landed on my 2...

I got a cateye fs509 pocket bike. i bought it used off craigslist. I was told the pocket bike had been sitting for about 2 years but after about 10 pulls i got it to turn on, i could take it for a test drive because the tire was flat. i got home pumped up the tire, and when i wanted to take it...

I have the Old yerf dog 3020 go kart and have the same problem everyone else has with it....steering. I already have a fix for the oversteer problem but i was wondering what i could do to help loosen the steering a bit. It is really rough, if i go over a bump it will steer to the left or right...

I was just riding around for anther daily spin as usual and i noticed my go kart started acting weird like the enigne was making jumpy noises and accelerating was weird and jumpy. Then at a stop sign when i tried accelerating it wouldnt go so i turned it off and went to the side and i saw my...

Yesterday after cleaning up the table that i work on, i found this spring which im guessing is a valve spring. Im not sure if it;s from my new engine or my old one but it was just sitting on the table and i never opened up the valve cover or took out the spring. So is there a possibility that it...

Alright so after about a week of constant sanding, wet sanding, wire wheeling and priming my go kart, i finally ended up painting it yesterday with flat black paint. Well it came out nicely but all i had left to do was put on a clear coat. I waited 24 hours and bought Matte clear coat so it...

Is it bad if i remove the rev limiter screw on my predator 212cc? or even loosen it? it doesnt seem to be revving to high and i just bought it yesterday i want it to rev higher but i just want to make sure it will not cause any problems

Predator Engine Rev Limiter I got a new predator 212cc engine yesterday and today i turned it on and let it idle for about an hour, turned it off then turned it on again and let it idle for another hour again to break it in. My first question is how long do i have to let it idle before i can...

Alright so recently ive been trying to figure out my sprocket gearing ratio. It has a 45 tooth axle sprocket and a 10 tooth clutch sprocket. What would the gearing ratio be. And i have a tecumseh powersport 6hp engine. With the ratio that it is at now, how fast should my go kart be going at max...

I have a yerf-dog 3020. For some reason one of my tires went flat, i pumped it up and the next day it was flat again. I read on the tire, it doesn't have the dimensions on it for some reason so i measured it, its about 13"x 4.5 (or 5"). also it says its tubeless to would i have to get a brand...

Hey i got this Yerf Dog 3020 (i think). I want to know if its possible to add a suspension on this and if so, how? And im aware that i would need to do welding as well.

Alright so i got this engine from a friend of mine for free, He didnt need it anymore, but with a little bit of tuning and carb cleaning, i got it running. He said it used to be on his go kart and it ran great til his go kart frame got messed up. I saw this on the engine and i guess its welding...

I have a yerf dog go kart and when i give it gas sometimes it sounds like it wants to bog down (after it has been warmed up) so either i have to press fully down or gas it slowly. I found that my throttle cable is bent and it is beginning to rip so im guessing that may be the cause of it...

Alright i have a go kart with a 6hp tecumseh engine. i bought it from craigslist and it has a torque converter on it. First off, i would like to know what kind of torque converter it is so if i put up a pic, would anyone be able to identify it. And second, when you buy an engine, does it come...

What's up everyone, my name is Andre and I'm pretty much a noobie to go karts. I came here hoping to learn more and having more experiences people answer my beginner questions and I have a feeling that this is the right place :p I currently have a Yerf Dog go kart, not sure what kind but yea it...

Okay so i am pretty new to go karts so i don't really know much about them. So i bought one off craigslist for 400$ and when i went to buy it i test drove it and it ran good and the engine sounded the way it should. I took it home then the next day i got it started in the morning and drove for...