Search results

I have a KT100 motor built by Stencil Racing Motors - which after searching around I have found out was a great motor builder in California in the 80's and 90's. The motor needs to be gone through, I can work on motors, but have never done anything w/ 2 strokes, so I had a friend talk to his...

I recently purchased a new kart - it's shall we say a project... unknown make/ model, has a KT100 built by Stencil Racing which is going to need an overhaulin', brakes frozen, crappy homemade master cylinder mount, after searching the forum here I found how they are supposed to mount, and will...

below are descriptions of the new axel and axel bearings I just received. I cannot get the bearings to slide onto the shaft, I can get them about 1/8" on to threads @ the end of the shaft. I don't want to damage the threads or new bearings. So I ask the experts..... what's the trick? Axle...

I have found a bunch of links and charts on belt size, but I want some help to be sure I order the correct belts for my karts I have a Yerf dog which has a 30 series TC with a 7" driven and a CTC measurement between 6 11/16 and 6 3/4" and a Manco also w/ a 30 series 7" driven and a CTC...

did american sportworks close? I was looking for a manual for my Manco 4005 B 09, and all links that I can find are broken does anyone have a link that may work, or a PDF

what is the best mothod for removal and replacement of the front wheel bearings on a yerf dog kart?

I recently purchased 2 go karts for my kids (or so the story goes) a Manco, and a yerf dog, both 2 seaters. The yerf dog belt shredded so I started removing the TC - after much swearing and frustration I got the movable sheeve of the drive pulley off the shaft of the motor, the stationary...