Search results

I second with Denny.

She's your ex too!?!?!?!

Welcome! Sounds like you have some cool projects in mind.

Again, bad@ss!!

Yep, was down for a bit for me as well.

So cool! Love your builds!

Ah, ice fishing. Now you are talking my language! Welcome!

Welcome and we love pic's around here. Can't wait to see what you have. Where are you located?

I have never had good luck with knock off slide carbs, floatbowl style I have had great luck. Bought a couple chinese VM22's from Isky back in the day and those worked just as good as a Mikuni(for some reason). Could be issues with the jets. Jetting with the right size for your area...

Thanks for discount heads up. I will be using. Have you ever tried any of Kidd's products? If not, I highly recommend. Top notch. https://www.kiddinnovativedesign.com/

This is great! I was unaware of this company. Between them and Kidd Innovations you could build a hell of a 10/22 for the fraction of a new one. Thanks for sharing. FYI: Be careful dry firing a 10/22. The only weakness in one is the firing pin, depending if you got a good one or not. It's a...

IMO the expensive high dollar firearms are all matched upper and lower receivers, machined almost perfect and carry a premium price tag. Some simple elbow grease and time working these parts (polishing, compounds, toothpaste etc.......) turn these average affordable firearms into buttery smooth...

That's what I would do, but I'd find a used group to mess around with and keep the original the way it is. Sounds like the original is exactly the way it should be, and parts are becoming hard to find since no aftermarket.

And yes, most shock lengths are measured from mounting point to mounting point. Just make sure to measure when it has a full load on the kart.

12 inches (approximately 305mm). Common Upgrade: Many riders switch to heavier duty or stiffer motorcycle-style rear shocks, which are often slightly longer at roughly 13.4 inches (340mm) or 14 inches, though this may alter the ride height or require modifications to your lower mounting tabs...

Looks like that one is a pain to mod. It's a drop in trigger group and finicky, apparently. Unfortunately there are no aftermarket trigger upgrades and not many parts available. You got an eye for modding, so I would look for a decent used trigger group and try and mod it. I would just deal with...

I ended up polishing the bolt and inner portion of the receiver on my tube fed Marlin Model 60 and it made a big improvement on the action.

https://ruger.com/products/1022/overview.html

They make a 25 round mag that works flawlessly. Have even higher capacity but reliability can very after 25.

Yeah, worse case, buy a cheap used 10/22 that's beat up and just use the use the receiver and whatever else is good and build it they way you want it. I paid $170 for one, basic grey synthetic stock with dovetail scope mount and no sights. Built it up from there.