Search results

Good luck please use my disegn

Use my design its more simp le than what you built

Looks a little scech

Ima going to have to write that one down

I use the $149 titanium flux core welder its perfect for welding frames and rollcages

What welder (brand/name) is it

Alot has happend to my go kart

What paint did you use

I might make my project real

it ok to restart a project while the round may work (it wont) the square has a better shape and it essayer to make angles with it and if you don´t have a drop saw and only angle grinder it is easier to cut a square and to make it symmetrical

here is a cool and easy design I made is is super simple and i think you could do it (BTW you don´t have to do the indycar body)

one more thing if this is your first time making a go kart i would recommend square tubing round tubing is harder to weld to make it look good and square is easier to cut and make it look neat and even if the welds are good you can get enough welds on it. also are you using a flux or a stick...

You i am in high school and we just had a lockdown someone had a wepon and we where in a lock down for 50mins

Got my self a gift

Like i said i am better with 2 stroke not forced induction but i worked on nitro engins alot

no I met like if you are constantly drilling out your carb the venturi needs to be bigger with unless you get a good air fuel ratio thats why nitro is used on small engines. Before i got into go karts I worked on nitro and tiny 4 stroke engines for rc vehicles. the average air to fuel ratio is...

nitro requires less air but if you drill out your jet you will need a bigger carb. Typicaly 28 to 32 mm

i have seen it done but it takes time to tune it i have some buddy's that work at a nice tuning shop and they focus more on ATV side by sides and go kart so they are great with this stuff they even have a ATV dyno that i could dyno my go kart on it one more thing you know you can mix your own...

The real questions is why not

question could I do a 90% nitromethane and a 10% methanol engine?