Whitetrashrocker's latest activity

Man, thats the best jacuzzi I've ever seen. 🤣 🤣

The coil would ground out.

I use the ball end at the carb. On the pedal end, I grind two flats (about an 1/8") opposite each other and immediately beneath the head...

Oh you of little faith. Four pictures to validate my story: 1) The challenge 2) The loading ramp--aka the launch pad. It's steeper...

Where's the security footage?

Just for giggles. My shop has a ramp up to the main bay door and a loading dock just about tailgate height over to the left. Often...

I had a drink in the "cup holder" and didn't want to spill it! Cut me some slack!

Met a kid at a local car show who met us and droned it and put this together on his social...

I heard those tires chirping. Very cool.

Looks like that bar bisecting the engine bay may have to be cut off for you to even think about putting a 212 in there. Take the...

Nibbi carbs are good replacements.

White smoke is oil burning. The only other thing it would be is water vapor. And if there was that much water in the gas to cause that...

Try putting the old carb back on to rule out engine problems and narrow down if it’s a carb problem.

https://www.cometclutches.com/ A manufacturer of: Centrifugal clutches Torque converters Brakes Belts Disregard most of what I have...

You mentioned earlier that you screwed the pilot mixture screw all the way in. That screws appears to be an air screw - if so, it...