Recent content by Wamba

I took the carb apart and cleaned as per Youtube videos instructions. All is right in the world again!

Would wiring the governor in the forward position be causing this problem?

Is there a 3 bolt to 4 bolt conversion hub?

Yes, Predator 212. No, exhaust, carb jets, and intake are all still stock.

I'll try to be brief... We began with a bone stock Predator. I added a full plate (for the throttle set-up), remote fuel tank, pulse fuel pump and wired the governor full forward and installed a kill-switch on the steering wheel yoke. Complete project, fire up the motor and she runs like a...

Thank you. I will be sure to take a closer look.

I live in a semi-rural area, lots of ATV riding going on in the "neighborhood". We have a 1/10 mile dirt oval in my backyard. We ride A LOT. Ands the neighbors use my track when they are tired of the streets. ---------- Post added at 02:17 PM ---------- Previous post was at 02:16 PM ----------...

Yes, this is my "race" kart. There does not seem to be any height adjustments in this frame. :-(

Ok, I'm a newb and feeling kinda dumb here... 6.00"A (2.0"B + 4.0"C) (A=Width / B=Inside / C=Outside) "A" Means, the rim is 6" wide? "B" Means, 2" from where the wheel bolts to the hub to the inside (frame side) of the rim? "C" Means, 4" from where the wheel bolts to the hub to the outside...

Thank you. I appreciate the information. I am willing to replace the rims to run bigger tires.

My kart has 3 bolt wheels (2 1/4" center of hole to center of hole, does that sound right?). I'm looking for a good source for additional (bigger) rim/tire options. My kart is currently set up with dirt track grooved "slicks" but, you guessed it, I'm looking for more ground clearance (currently...

Thanks!

I've lost the mounting bolts for the pull start unit. :-( Could someone tell me what size I need to replace 'em?

I actually don't know. It was a hand me down from my father-in-law.

Any recommendations for a throttle cable for this kart? I'm going to install a top plate but I don't know which cable to use.