hmm
I tried it three or four times set different was same result I was gonna mess with it again last night and it was dead I finally got it where it seemed to be about 1000 off from my other tach I may mess with it again after I get another battery
Awhile back I posted that I had a subaru ex27 9 hp I added a new 22mm mikuni carb with adapters. engine sounded to be idling fine but the tach sad it was at 2500 took carb apart cleaned same result. so I finally took the tiny tach off my other engine and hooked it up started her up and was...
hmm
Ok I messed with it some it will only start with the choke once running I've got it to idle at 2500 anything lower and it sounds like crap and sound like its gonna sputter out . that seems really high to me for an idle I've checked the tach to make sure it's working right and it says...
Well I got the governor removed and new carb installed on my subaru robin ex27 9 hp. thing I'm trying to figure is where to start. it starts up and runs with the choke lever pulled but the second I flip off the choke it dies. I know these have a idle and air jet screw just trying to...
I've got a subaru 9hp ex27 I've removed the governor and added a 22mm mikuni carb I've got a tiny tach on it and was wondering is there a ballpark idle rpm I should be looking for or just till it sounds good? ?? Thanks for any input :thumbsup:
Hi all first post I'm in the process of adding a mikuni carb to my subaru ex27. what I'm trying to figure out is how others installed a lil filter for the breather tube. when I take off the valve cover there looks to be no way to get to the backside where the tube enters the cover ...