I am looking for a one or maybe 2 seater Klipper kart. I really just just need the frame I don't need a motor. I am in Tn. and I'd like to buy one in the range of 150 to 200 dollars.
Hey guys, anybody know how to adjust the governor on my predator motor to get more power I don't want to remove it if I dont have too just open it up a bit.
Hey guys I have a couple Klipper Karts that I need some parts for. I need some hubs front hubs and the rear ones also. Any ideas as where I can get parts for these karts?
Hey guys do any of you know if I can get a comet 40 series driver with a 3/4 in bore. I replaced a 10 hp tecumseh with an 8 hp briggs. the tecumseh had a 1 inch shaft and my briggs has a 3/4 shaft. the driver has a built in key way or else I would get a bushing to make the shaft 1 in. any ideas?
My real problem is trying to take the wheels off they're seized to the axle so I thought if I took the axle and all off I could take it to the press and get it off. I figured out that the axle will not come off with the wheels still on. any ideas?
Yes I removed the chain and brakes I'm not sure what you call the bearings theres a plate that's formed to bolt up against the beaing on the wheel side and it has 2 carriage head bolts that fit in square holes.
Hey guys, I'm new to the go kart world but I bought a hard drive go kart that needs tires. I cannot get the rear wheels off the axle they're froze up. I could use some help getting the entire axle out of the frame then I can press the wheels off, I removed the bearing keepers but I don't know...