Recent content by TKmech21

  1. T

    need a TC Setup for a 16hp 1 1/8 shaft

    Ok I have made some purchases. I bought some 7/8 mounted bearings, and a sproket, and I did buy that John Deere 90d secondary. I will be getting the 94c for my driver clutch. How should I determine the spacing and the belt? any help?
  2. T

    surplus parts

    I just stumbled accross the site myself and was just about to make a post about it. Great site and prices.
  3. T

    first "re"build

    yeah I'm going to. I just thought I really dont need to use the weld through primer on the entire thing. just on some areas that I am planning on doing some more welding. then I got to welding the seat mounts in, and then it was time to start work. I'll get to it.
  4. T

    need a TC Setup for a 16hp 1 1/8 shaft

    I found a nos secondary clutch from a john deere snowmobile, I researched it and found that it is infact a 90d comet secondary, only thing is it is a 7/8" bore, the 90d's available now are 3/4" bore. The machining of the shaft to 1" is starting to sound more appealing. So much for thinking I...
  5. T

    need a TC Setup for a 16hp 1 1/8 shaft

    If i pay up for a custom clutch in 1 1/8, will I really notice a difference between a clutch and a TC? will be an offroad kart.
  6. T

    first "re"build

    So here is the notched rear bar for the sparkplug clearence: Here is a before and after of a split in the tube: I got the seat mounts of of the trucks were are scrapping and welded them in the kart: Here is one of the seats mounted: Coming along, Not sure if I will get a chance to work...
  7. T

    first "re"build

    I have some connections :D it was free.99 :thumbsup: I did get a quote on it from a different company that does only blasting, the guy told me without seeing it, I was looking on a high scale of 150.00, he said if it was easier than expected and it took him less time, he would just charge me...
  8. T

    need a TC Setup for a 16hp 1 1/8 shaft

    Ok I see, your thinking to get away without having to get an 1 1/8 driver use that type setup. That is another option. I'm thinking the 94c with a sled secondary is going to be the route to go. All I will have to make sure of it the center to center spacing. I do want to use the backing...
  9. T

    first "re"build

    got the frame back from the blaster today, time to start rolling on it now. I cut off and grinded down all the bracket tabs that I will no longer be using, atleast all the ones I know of for now. to make for a ckleaner job. The cross tube I cut out behine the seats I welded the holes in the...
  10. T

    need a TC Setup for a 16hp 1 1/8 shaft

    Fatcat, do you know what the shaft diameter is on an fl250? I found this kit that looks like a great deal if it would work. I know the driven would work its a 90d the driver is what i have in question. Anyone know if mfg would put together a "special" kit for you to come close to the cost of...
  11. T

    my mule wana be

    :cool: eating pringles, flipping the bird.
  12. T

    need a TC Setup for a 16hp 1 1/8 shaft

    My setup will be all custom as far as spacing center to center. So i'm guessing if i knew what the spacing should be I could just make it work. I havent come up with an idea for a jackshaft or anything yet. My project is to the point i have the engine mountable on the swing arm and all my...
  13. T

    need a TC Setup for a 16hp 1 1/8 shaft

    That would be awsome. I looked up snowmobile secondarys on ebay, there are a whole lot to choose from and cheap too. If that would work i would definately explore that option. So you run a snowmobile secondary on your Odyssey? Or just the 94c?
  14. T

    need a TC Setup for a 16hp 1 1/8 shaft

    I checked. the only one I can use would be a 44c, or 94c. again i have an 1 1/8 shaft. There are some 94c's available, and I guess if thats all I can find I will have to shell out the extra money for it.
  15. T

    need a TC Setup for a 16hp 1 1/8 shaft

    I ordered a 44c from MFG and they sent me an email back saying they didnt have any in stock, they were on backorder and they did not know when they would be able to get any more from their supplier. If Comet is no longer in business is there any other manufacturers or options? The 44 series...
Top