Recent content by Thepartsguy

looks Like a Clark or rupp kart! Maybe a rob ron? awesome picture!

I do not know if you can run a stock tec h40 carburetor with a pulse pump. I do know I have pulsed many a carburetor and besides a very very simple float adjustment have had zero issues. I will definitely be more mindful when I recommend a carb setup. Hope i didn’t steer you wrong on this one...

I’m sure your figuring out any carb that isn’t the stock tank carburetor will need it’s own throttle cable and gas tank. The Tillotson is ran from a fuel pump so I just run an external tank mounted anywhere I want it. You will need the tools to make a washer for The throttle cable. Any setup...

I have never used a tecumseh carburetor with this intake I have only ever used the Tillotsons. Really do hope it works for you and you can get the line hooked up. If it goes through a hole drilled in the metal shroud make the hole a bit oversize and run the fuel line through a rubber grommet...

Take a tecumseh 3hp engine block and a Tecumseh 5hp engine block to another part of the earth and ask them to cut it out of billet would probably cost less then one American $100 bill… Whatever that would equal out to in there currency. Bring that billet tec block back to the states and ask...

Tecumseh intake 51-0-158 is from a 5hp Tecumseh push mower with a float bowl carburetor. Bolts to a two bolt 5hp Briggs block. You will need to make your own throttle cable. I use them for Tillotson carburetors

The only one I know of for a tec float carburetor is 691922 and after buying it a float bowl carburetor and making a throttle you might be $80 into a carburetor swap. IF YOUR BLOCK IS NOT A THREE BOLT HOLE INTAKE BLOCK DO NOT BUY THIS

It’s local and I’m gonna offer $100 and tell the guy I’ll enjoy it as it should be. Cut the the kart off that’s there beef up the engine side of things and weld it to the back of my Clark? Ford blue also paints up well

Imagine that kart bright red chrome headers 6 speed CBK 750 off the back with the wiring sorted. I can fix her!

Marketplace allows creative people who build random stuff on there off day and show there projects to the world. No way to show it off to Facebook back in the 70’s It’s $150 and local enough. I could finish it paint it all up and run it.

They pay lots of money for a new machine and won’t pay a guy like us hourly for a couple hours of work to fix that expensive machine. They instead just go buy a new expensive machine o_O I’ll slug a beer down to easy money :cheers2: Saturday is for the boys!

It seems as if EVERYONE around here has went the throw away society route. Or do not know how to fix things. Example: instead of cleaning up the very simple two stroke and making a good quad strip it instead and leave it behind a shed. Just take it apart for something to do then abandoned it...

I was hoping it was going to be but the CVT was to expensive. Also none for sale local so it would run but just sit because it doesn’t move. In a perfect world this would have had the CVT drive parts and would have been a running riding quad. Just cut the frame make a square box and weld the...

$125 and he loaded it himself. I got some easy quick cash and he got the parts for his kids fourhweeler. I’ll flip atv’s like that all day!