Well here it is! I'm calling it done because i never time to work on it anymore, kids it turns out, keep you busy! Theres snow on the ground but ill try to get out soon for a ride and donut video :)
Thanks guys! Chipping away.
I got some throttle and brake cable mounting tabs welded up.
Any tips for attaching the pedals to the cables? And adding a section of cable (brake cable is short by 3 inches)
I should have this thing done by now.. but free time has been at a premium these days!
Anyways.. I finished the aluminum underpan, wired up the killswitch and started running the throttle and brake cables.
I'm working out the pedal stops and spring return system, also theres a bit of a fuel...
Following! Sounds like a great build. I'm working on a similar but smaller build. Minus the 6 wheel and gunner seat :) More power might be nice. Especially in sand! Good luck to you, sir.
Quick update! I cut out some plywood that will become the seat and backrest. I think I'm going to upholster it in some black fake leather over some thin foam.
I moved the kill switch from the engine to the 'front dash' for easier access. Just gotta run some new wiring.
I made up a template for...
Got a little bit of free time today and decided to tackle the tie rods and pedals!
Also, two seater conversion is all done!!
Once more, the kart was back on the home garage alignment "machine" :)
Tie rods worked out nicely and steering is nice and smooth. I left the toe in about 1/16" to...
Thanks for the advice gegcorp! I managed to get all the angles working correctly and the roll bar actually turned out pretty good. I'm using mostly a chop saw and then an angle grinder for the really intricate cuts. Once you get the hang of working with square tube, it's not too difficult I...
I took one look at the kart this morning and decided the asymmetrical roll cage looked really bad haha.. so I modified the passenger side rail to match the driver. Much better!!
C'mon you guys gotta tell me when something looks dumb, you're my trusted gokart advice council :)
Bansil, the...
So after some thought, the kart will once again be undergoing some changes... the original goal of the kart was to be something I could ride with my kids, then ride with them as they learn to drive. So single seat isnt an option. It also turned out really fast, so not good for small kids on...
Sorry for the late post.. we had our second kid so free time has been at a premium!
I've had a little bit of time to tinker on the kart. I got the engine mounted and took it for the first test drive!! It was faster than I planned and probably not suitable for kids. Probably 50 to 60 kph. Oops...
Got the tie rods installed, aligned the steering, and did a few soapbox hill tests! The steering is nice and smooth and very easy to turn. It also turns on a dime which is awesome.
I'm planning to get the engine mounted up this weekend and will try to post a video of the first test run!