Recent content by sandy222

ok thanks so much you have been a huge help.

I will have to look it up and watch a video on it to make sure I do it right.

yes 203581a is the one that I purchased. our top width measure might have been off but I did buy the symmetric with 3/4 top width.

thank you all for your answers you have been a big help. I did have a second opinion on my measuring though.so we came out with a 7 5/16 centerline a 7 drive pulley and a 5/8 top width so I will look on the chart provided and hope this will fix the problem we are having. big big thanks to...

Sorry its 11"

I have a new go kart and im lost. The centerline is 11" which was bolt to bolt measured and a 7" drive pully and looks like a 20 series to me. Can anyone tell me what size belt I need because im sure the one on it is wrong.

That is the belt system I have. As you can see the belt is wrong I think. I measured 11" for centerline which is bolt to bolt and a 7" drive pully and it looks like a 20 series to me. Can anyone help tell me what size belt that I need.

ok thank yall so much I will take pictures tonight and submit them so maybe someone can give me some help in making this easier. I was looking at chain drive systems and they were saying a bore specification. will I need to do measuring to make sure I get the right feet as far as teeth ratio and...

the reason we want to convert is because yesterday the belt got stuck on the back pulley and locked down the wheels. there is a problem where we will push the gas and it takes about 2 minutes before the pulleys will spin to allow the go cart to move so we assume that its the belt system but this...

our set up is like that I wish I had a picture to send so you could see what I am talking about. the only thing is in the picture that you have there is a chain underneath the belt system and mine the chain is by the back wheel near the body and the belt drive system is by the side of the motor...

I have a 2 seater carter go cart with a 5.5 Honda motor. the frame is chain driven but the clutch is belt driven. I would like to convert the belt drive system to a chain driven clutch but I don't know how. any help or advise is greatly appreciated. thank you