Recent content by Rubidoj

yes i have the tank half full. and the bowl is empty i pull on the crank a couple of times and it will full the bowl. the bowl has no holes in it. the carb has one long pick up tube and the short one that draws fuel from the bowl. the short one doesnt pick up anything its clogged internally...

Also is a raptor carb good? They are tunable(can change jets? right? I've heard they flow better than this fun power thing.

Ok I've come to the conclusion that this carb is garbage lol. It will only start if I'm giving it starting fluid :( sounds beautiful btw, I have tried all combinations of ways to get it to run and nothing. I tried feeding a wire up through the jet out the Venturi and it seems clogged if I spray...

Ok guys I'm having a problem getting it to run, so I took it to a lawn mower shop and they were stumped they saw no governor and were like nope nope nope this will not run without the governor Ok thank bye lol I need help

yea for tuning. i know i can check the plug but i dont wanna do that to test and go every time lol.

also i have been talking to Hunter over at ARC Racing, and he told me it get a cylinder head temp gauge. i havent found anything cheap. anyone know where i can get one?

kewl!!!!does anyone have any pics of custom linkages for the carb ? since i removed the gov. i am using the setup down there for now but i dont like it.

i read in a bunch of site to do .010 - .012 i dont have the blower housing on yet so i can adjust it ill look more into that.

i got the wires they were for kill switches so im just going to use one under the steering wheel. i used a .010 feeler gauge on the coil to flywheel gap. how much oil do i add to the engine? im running royal purple, ive heard of some guys running lower that stock oil amounts to reduce windage...

HELP HELP HELP!!!!!!!!!!!!!!!! im connecting the coil and it has 2 cables coming out of it i know one goes to the kill switch, where does the other one go?????

what gap should i have from the coil to the flywheel? EXHAUST CAME IN !!!!!!!!!!! all i need is GASSSSSSSSS!!!!!!!!!!!!!! im so freaking anxious lol. ill make sure to make a video after it runs.

i am using a stock chromed piston couldnt find any aftermarket chromed stock style pistons. what do you mean time it in the hole? like get a flywheel offset key? on another note i cant get the pull starter bolt back in its like the inner diameter has shrunk :mad2: im filing it down a little bit...

more pics.

Hey all, i need a little bit of help on rebuilding this engine. its a Kool Bore 5hp flathead briggs that was on a gokart i got in a trade. i took it apart to rebuild it but didnt take pictures before tear down, but trust me it was bad. the reason for the tear down was the carb was dirty so as...

i was about to flip out mat! al that time spent on that body kit for the panda lol.