Recent content by nileshc

I just bought the kelly controller (KDS36100E) and I am having trouble with figuring out the wiring. I have not added the reverse contactor and the wiring diagram shows the controller having 2 junctions or two connectors but on the actual controller I got there are 3. Here is the link to the...

I was planning on buying a kelly controller (KDS36100E) http://kellycontroller.com/kds36100e100a24v-36v-mini-brushed-controller-p-270.html Is this brand or controller reliable? Also since the controller does not have a charging port, how does charging work? Would I need to disconnect the...

But my motor will probably draw at 60 amps max, it wouldn't reach 100 amps? Or am I just wrong? Also I already have a 36v 2amp charger and I was just going to use that to charge the batteries all together

So after digging around, I found a controller that seems good. Here's the link http://kellycontroller.com/kds36100e100a24v-36v-mini-brushed-controller-p-270.html Do you think it is a good controller for my setup even though it says it's for a brushed motor and my motor is PM and if it is...

how about an Alltrax AXE4834 motor controller?

The motor controller I am using is rated for a 1000W motor. I found some motor controllers. This is one is rated for 1200W: http://www.monsterscooterparts.com/36v-1200w-controller.html and this one is rated at 1000W but it was the max amps is 28 amps...

The motor controller I am using is rated for a 1000W motor. Sent from my iPhone using Tapatalk

Thanks for the advice and the jokes😀 Sent from my iPhone using Tapatalk

Here are the images. I believe that you are right. Also do you have any recommendations or is it worth it to spend the money for an expensive golf cart controller? Sent from my iPhone using Tapatalk

What would you recommend? I can't find another options besides going to expensive golf cart motors

I have cheap Chinese motor controller rated at 40amps and 36v that keeps catching on fire at full throttle. The motor is rated for 36v and 35.6 amps. I have three batteries at 12v and 13ah each wired in series. I don't know why it's catching fire and have gone through two controllers.

Can you send me a link for the motor on Craiglists

So is there a motor that is isn't costly that I could get that's less than $200 Would this also mean upgrading my motor controller and new batteries?

Acceleration wasn't good, it was the speed that I was looking for, but I was only getting 20

10 inch wheels Should I go for 60 teeth on the axle or something different