Recent content by Mopower71

Not my kart, just a picture of one just like I have

It's not listed on there. It's one of the early yerf dogs

How about pictures of a repaired one.

Does anyone know where I can get, part number, for the replacement spindles and tie rods for the 3020 yerf dog. The ones on it let the wheels turn to far and lock against the frame. It is also real hard to steer. I read somewhere here that there was a recall Thanks Norm

Sort of the same, but that one is a two seater, so it's not quite the same

My yerf was missing parts also. It had a Max Torque set up on it. This is where I got my belts and Driver unit from. http://www.gokartsupply.com/mxbelts.htm

I have 2 of those in yellow with black numbers. I have been asking the same thing, and have come up with Yerf-Dog 1450. But I can't find any info on them.

The torque converter is a MAX-TORQUE VARIABLE SPEED TORQUE CONVERTER

Just need the mixture screw for the carb now, and still need the torque converter parts

Hi Anthony, I'm fairly new here also, but Welcome. Live axle would mean both wheels are driven on a solid axle. Some karts are only 1 wheel drive and the other wheel turns independently, usually on it's own axle. Next size smaller gear on the axle would get you more speed, but less torque(less...

So I tightened the chain up the other day, it was so sloppy after oiling it and running it around. I lossened all 6 bolts and slid the engine and jackshaft back to snug it up. Ran the cart around for a while and ieverything was good. Then the cart wouldn't move at all as the belt was real loose...

My plan is to run them through the summer then tear them down repaint etc. over the winter. I still need to find a torque converter, and rebuild the carb and find a spring for the throttle to governor arm. Also need New tires on the front of both and get the rears to stop leaking.

Kaptain, I'll get some pics up when I get better internet service. They were suppose to hook it up today but the run from the road to the house was to far. He didn't have enough heavy cable. I paid $200 for the two of them. What do you think? The other 2 I picked up I paid $150. Those are fun...

Not sure if anyone cares, but, I got one of the karts up and running today. Had to swap the throttle to governor arm spring from one cart to the other, because it was also missing. also had to adjust the arm because it was not opening the throttle hardly at all. It does need new front tires as...

Thanks Bruce, I already checked that but it didn't help. The karts have no suspension, 5.5 Tecumseh's, 18x9.50-8 rear tires and 145/70-6 fronts. Still looking for info on them.