Hi everyone. I’m in the market to purchase an FL350 and may go and look at one I recently came across. It looks like the owner did a lot of work/upgrades etc. Based on the list of work and upgrades listed in the link below, is there anything I should ask about when I go to look at it? Anything...
Thank you everyone for the advice and suggestions. I'll report back once I've had some time to disassemble the brakes and get a good up close look. Always appreciate the support on this forum. Can't thank you all enough.
Sent from my iPhone using Tapatalk
I've posted a few times on this forum about a go kart I've been working on (a manco XTK-710E with 10hp Subaru robin engine) and have gotten great advice from everyone here. My next project is fixing the brakes which seem to be worn right out. Unfortunately for me it's a 5 hour ride to get to my...
I do appreciate all of your feedback. Thank you very much.
I'm not necessarily looking to do too many modifications. Just trying to put the best quality and performIng engine that I can on my kart, that is still relatively close to the original stock engine and easy to swap out. I don't mind...
Here is the go kart I have:
http://www.bmikarts.com/Manco-XTK-10-Go-Kart--DISCONTINUED_p_2596.html
Here are a couple of the engines I'm considering putting on the go kart...
Hello Everyone,
I have a Manco XTK 710E with a 10 h.p. Subaru engine. It looks like this go kart was originally offered in a 10hp version (like mine) and a 13hp version (XTK 713E). I'd like to upgrade my cart to a 13 hp engine. From what I can see, all of the other parts on both models are the...
I'm loving the nostalgia and it's just feeding my urge to go out and buy an Odyssey without even checking the thing over butttt, would anyone happen to have (personally or friends that have) working mechanical
Knowledge of these little fun cruisers? Any idea of certain parts that typically go...
Hello everybody,
Over the past year I got into go karts and started off with a Manco XTK-710E (2 seater with a 10hp Subaru robin). I mostly ride on trails and do a little off trail riding as well. I'm looking to add a 2nd kart to my collection, something with a little more power for myself, and...
I just wanted to update everyone on this thread. I do apologize for the delay however, we all know real life can get in the way of our golden go kart dreams. As it turned out, the issue causing the wheels to continuously move was indeed within the torque convertor. One of the roller weights had...
So, I'm heading back to camp this weekend and will have a solid opportunity to once again disassemble the torque converter. I'll get some good pictures of the weights, and the channels they sit in and post when I get back. That should help decide what direction is best to go in.
Sent from my...
Hi LandUse - I could buy new roller weights at $20-$30. Or it could be the springs holding them together, another $20-$30. Or it could be the channels the weights sit in; I noticed off-set grooves where the weight had shifted to ($60+ for a new plate?)I just feel like once I start replacing...
Update - I figured out how to get both my drive and driven units off of the go kart. I took both apart and cleaned them. Both were surprisingly clean and without rust. Inside of the drive unit I discovered one of the roller weights was crooked within its channel. After cleaning and replacing...
Happy new year everyone. As promised here is my update on this thread. The good news is I learned what and where my idle screw is. The bad news is the root of problem does not lie here. I proceeded to attempt to take my torque convertor off (in an effort to clean it) and quickly learned (at...