Recent content by Made

Would longer pushrods and maybe the +.020 billet rod give the springs more depression and cleaner movement of the valves, I'm just worried at stock the springs will be too stiff, cause like I said I was planning on getting the cm pushrods ss valves and billet rod for more durability but if it's...

Hey Bob with that cam and the 26lb springs do u think that the stock lift would be enough or do u think long term it would wear the valves faster, main reason I mentioned the cm push rods and ss valves is I want to build for some longevity, also I found arc sells cm pushrods for same price but...

Looks like u got a plan man I was looking into the same cam, looks like I'll be following another similar path with ya, only I'm just gonna go with standard length cm pushrods and billet rod with the 26lb spring and ss valve set but I'm gonna keep the stock rockers. Since I'm gonna take off the...

Okie dokie I think I'm all set bob thanks a million as soon as I get all my parts I'm gonna start a thread for it :) I'll be watching ur latest build too, that torque cam sounds interesting, like something that might push a fellas boat up current a lil better ;)

I got ya, well here's another one off question I got my flywheel and stator n right now I'm lapping it, so my question is when you lapped ur flywheel did ur shaft come flush to the end of the flywheel? I feel like I'm stopped at about an eighth of an inch til it's flush, is this normal and the...

Okie dokie, so im thinking prolly swap to a 15 amp breaker and since I'm going to be using a rectifier/regulator is there any need for the diode at all or do u think i can just locate and remove it? Also got flywheel and stator in today so I'm getting excited lol hope I'm not bothering you too much

What size is the breaker in ur keybox housing bob? Also dI'd u ever figure out if it has an in line diode? Thinking ima have to replace breaker and diode for 10amp

How'd the break in go bob? Have u had a chance to run he for long? Charging system holding up good?

Ordered that shroud, so I'll let ya know how it fits when it comes in tho I lt may take a while coming from Canada

No joke lol I've been over a lot of the stuff uve provided me before you showed me but alot of it was hard to make heads or tails of so u posting is made for excellent reassurance and helped me bypass alot of further research so I get what ya mean about sifting thru all of this info it's hard to...

Now that's some fat I can chew, see I wouldnt have even thought about single and 3 phase. Now I do think that the 3 pole stator only has two wires so iguess it is single phase. I think the connector from the kohler rectifier has 4 prongs (one is probably a ground instead of using the base to...

So in theory any 10 amp 12 volt rectifier will work? Granted it is wired properly.

Nicely done charging aside i cant wait for electric start cause as a boat motor the trim and vibration can really flood and stall a motor so electric start is worth it alone but in regard to out discussion earlier about the deep cycle battery charging, my battery is a 92ah battery so the 10%...

I'm also thinking ur right about that second fan shrould being the correct fit I sidebysided some pics of predator shroud and that one n the bolt pattern looks identical to me

Ive been looking into your charging mod with the 10 amp flywheel and kohlers 3pole system stuck on my mind due to the 10 amp charging requirements for deep cycle batteries. Ive found this rectifier during my many a google, altho im unable to find any specs on it yet aside from the amperage range...