Recent content by Konman1994

I bought the stingray go kart kit from northern tool a few years ago and now I need to replace one of the wheels on it now(not the one with the sprocket). I looked all around online and cannot find tires that are the correct rim size or bearing size. the tires say 15x6.00-6 and I'm not sure what...

When adjusting the rockers DO NOT tighten the nuts too tight or you can strip the threading I'm glad to hear it is at least trying to start.

On these engines the governor is the throttle. If you can, try putting the governor back in and/or taking a governor off another engine and putting it in. Taking the governor off of these is not necessary. There is a way to limit the governor and increase your speed by at least 30% and it is...

It's not the carb if you put gas through the spark plug hole. 1:Check the kill switch 2:muffler is important but it should still be igniting without it 3:combustion could be bad as in the O-rings are broken or missing. 4:Valves may have too big of gaps(watch video on adjusting valves) 5:water...

Jammed in the rim I meant*

I need either the rim, bearings or the whole wheel(tire, bearings, rim) and yes this is the one from northern tool. I just want to know if there is a replacement wheel that will fit the gokart chassis. I would prefer the entire wheel since part of the bearing that broke is jammed in the tire and...

Could be the idle screw also look up videos about engine starting problems if you haven't already the valve springs shouldn't be messed up unless you messed with them before. Also the gaskets on the carb could be on wrong( backwards or upside down) try to see if the holes on the carb match up...

I recently broke both bearings on my rear passenger side tire On my stingray gokart kit and I can not find a wheel that will fit the axle on this kart I was wondering if anyone else had to replace the tires on this thing and where they found them. Additional info: I found out the hard way that...