Hellion's latest activity

Most of the time, the stock Predator flywheel just throws off its magnet into a low earth orbit. The magnet is not securely affixed...

https://www.ebay.com/itm/226212752797?_skw=212+billit+rod&itmmeta=01M11VQMBFZM9ZKDJ45BJFZGZE&hash=item34ab54ad9d:g:g1cAAeSwRXVqUKAk&itmpr...

Sometimes I just double the stock springs, but not in the farthest hole in the governor arm. Maybe both in the middle hole and adjust...

Belt location looks right on. Once the clutch gets spinning and the sheeves start closing, it will all work out.

One other thing I noticed in my mockup. I think I assembled the driver pulley wrong, and the belt is sitting fully on the spacer, not...

You’re my hero! Do you use a generic/upgrade/aftermarket/hardware store spring or what? FYI to the newbs: Tension on the governor...

Is it not safe and reliable, now? I like to leave the governor connected and working. I often replace the long spring between the...

These are contradictory statements. Safe and reliable would be NOT changing the springs. Dont change the springs until you change the...

If you don't change the flywheel ( and the rod ) just keep the stock valve springs in there. That 5400 to 5500 rpm range where they...

What rpm are you targeting? The end goal. I use stock springs as my rev limiter at the 5500 or so.

Troisième partie: Mustie’s car must be one of these. Originally rotary powered. Anyone ever been to one of the mentioned race tracks...

I need some edumacation. The Ghost can’t mount the old factory style fuel tank in the normal way, mounted to the block like the plain...

Here's a good trick for checking float level while it's installed on the engine. See the bowl drain screw and hose barb? Put a clear...

Just a guy, his bear and a Jeep. Oh and lots of 🍺. So, were you supposed to drop the pull tab into the beer before you drank it? I guess...

Tip of the needle looks ok to me. Definitely not perfectly horizontal. The pic shows Amazon carb mounted.