Recent content by Flurky123

Hello, for now I can offer you this. I will make a better and more extended video later :p Greetings https://www.youtube.com/watch?v=reJ4t0I3jVM

Hello, My brothers friend could take care of a hall sensor. We looked just at the input/output voltage to be 3.6-6V. When I came home from exams my brother already soldered the new sensor to the wires. And it works again, I'm so happy :p Tomorrow i'll have to defend everything I did to a...

SX03 122 Greetings Flurky123

Hello, I can't seem to find the exact same sensor. I know the part number, but I don't know anything about the make of the sensor. I did some research however and I find a lot of Honeywell products. If the sensor has the same specifications, it should work? Right? The other option would be to...

In the end I think you guys are right. It's completely unexpected. The only way of getting to the sensor was via the motor or a flying arc. Thank you guys, I'll try to find a new sensor and solder it to eachother. Itsid: I know what you mean by the flying wires. Actually it's a temporalily...

Well, we're affraid the sensor has given life. But I still can't seen how it has been roasted. I mean, when welding, it was at a relatively safe distance and everything around is seems to be from plastic. But yes, you're never sure. My brother is looking for a replacement sensor, I'm in the...

Hello, I don't think I made wrong connections. Everything worked already with these connections. It's pretty straight forward: red to red, black to black, green to green. Between red and black I've got 4.6V, I measured it. Resistance between red and green is very high (Mohms) and between red...

This is a video. It happens when I pull out the black wire. https://www.youtube.com/watch?v=1MJ2F_ENLR4&feature=youtu.be

Hello everyone. Today I mounted all the things together. Gave throttle a place, got some support for my feet, etc. Now a problem occured. I don't seem to know what it is. It has something to do with the trottle. I connected red to red, black to black and green to green. Nothing happens when I...

Hello everyone, I'm almost done, today I did my first run. After fixing a lot of bad contacts and even creating a short circuit (not paying attention) I finally managed to make it drive. NOTE: There's no brake and I still have the throttle in my hands. I have to mount this once. I really...

Well: we have to get this finished by the 20th of June. Yes I know we're late. And to your question: we are working on this with 2 persons and the other one made the motor bracket. I know, it's not the best position. But do you think i'll be strong enough? The motor give a lot of torque...

Hello everyone, Today I worked a lot on my electric gokart. There are 2 problems: - There is a bolt in the way of the chain. I'm basically going to turn the furthest point of the motor up. This will lift the chain so the bolt is in the middle of the chain. - My collegue made the motor holder...

Hello everyone You haven't heard me in a while, but I'm back. I took some pictures of the project until now. Still waiting to receive 2 sprockets and a chain. I ordered a sprocket (T8F) from tncscooters.com but it's, for some reason, not compatible with an 8mm chain. Now I can get a motor...

Allright, I think I get it now. Thanks a lot! Flurky123

Hello, So far I get it :wai: I just don't really understand how the magnetic force changes the electrical voltage output. Does this have anything to do with the force of the magnet of does the sensor just measure the magnetic force at that time? Flurky123