Recent content by drew29058

  1. D

    hello from sc.

    The problem was the spring between the throttle linkage tothe linkage that controls fuel on the carb was to tight. Essentially the engine was idled too high due to the spring so i had to lengthen the spring to bring down the idle speed.
  2. D

    Clutch not disengaging.

    Im using my phone not sure how to upload due to the site. Its a honda gc-160. Max torque 10 tooth clutch. If i have the chain off the engine will crank on choke. Run fine. Turn choke off engine runs fine. Put clutch on. Engine cranks on choke. Runs fine. Take off choke kart is wide open full...
  3. D

    hello from sc.

    Generic max-torque clutch. 10 teeth. 60 bucks.
  4. D

    hello from sc.

    The idle is as far down as it can possibly go
  5. D

    Clutch not disengaging.

    New engine. Used clutch and new clutch. Engine runs perfect with choke on and choke off. As soon as i put the clutch on (used one and new one ) when i take choke off it just wants to rev.
  6. D

    hello from sc.

    Whats up guys. Some serious machines out there. Im having a simple issue. Kart cranks right up idle for a while on choke take it off still runs fine. Revs nicely. Put the chain and clutch on and it wants to wide open go without any throttle. Take the clutch off. Back to normal. Its a...
Top