Recent content by Dean B

  1. D

    On off switch Honda gx160 engine

    ive done bit more research I've think I know what im doing now, but thanks for the link
  2. D

    On off switch Honda gx160 engine

    I want to have a on and off switch on my steering wheel instead of leaning over to the engine to turn the engine off as I have a twin engined kart with 2 Honda gx160 engines so have to lean over to two engines to turn them off and on. I have a toddle switch for the steering and I want to wire...
  3. D

    Centrifugal clutch no set screw??

    I just need a end play washer, I will make one or if the local only kart shop in town don't have one I will sure just make one, will be easy enough to do with the right tools, can't wait to have a go of her, only ever drove gx160 and gx200, so two gx160 engines I should imagine it will do 50mph...
  4. D

    Centrifugal clutch no set screw??

    Do you have any experience with this or these clutches as I've never seen one. Seem after hour or so research tnat it's missing a washer called a end play washer. The other engine is fine the right side engine, and clutch is working as it should. It's just this clutch on this left side engine...
  5. D

    Centrifugal clutch no set screw??

    ... Looks to me after bit of research that the clutch seams to be missing a washer before you put circlip on?? I've researched and found its called a Norman clutch?? ---------- Post added at 11:33 PM ---------- Previous post was at 11:27 PM ---------- It won't let me upload the pic but the...
  6. D

    Centrifugal clutch no set screw??

    I will do video in next half hour of what I'm trying to say haha Can you see how it just slides of the inner clutch housing and it slides off the inner clutch towards the engine and rubs on the engine when you give it throttle?
  7. D

    Centrifugal clutch no set screw??

    Here's there kart This is the kart guys, will get better pictures tomorrow.
  8. D

    Centrifugal clutch no set screw??

    I have just purchased twin engined go kart with 2 Honda gx160 engines. The engine on the throttle pedal side of the kart the right side engine has centrifugal clutch with sprocket facing out wards, this clutch operates ok Other engine on the left side the brake pedal side the centrifugal...
  9. D

    Newbie question on gx390 engine

    No it's not tapered shaft look at picture there above, click on it and zoom in. Going to go buy the engine for £100 and just make my mind up with what I'm going to do with it when I get it, even if engine don't get used or put onto anything for few months it's still worth buying. Will be...
  10. D

    Newbie question on gx390 engine

    Other side of engine Other side of engine
  11. D

    Newbie question on gx390 engine

    Heres the engine Here's the engine
  12. D

    Newbie question on gx390 engine

    Poboy kartman I will sort my profile out later buddy, and crazy kart I know that I would need 1" bore clutch, was thinking on just buying centrifugal clutch for it, and like you said I might aswell buy the engine to just put aside for anything else that pops up. Thanks for the info buddy take...
  13. D

    Newbie question on gx390 engine

    Hi there guys, I no this will be a stupid question for use but I fire away with it. I have a old manco 2 seater kart with 5hp Briggs engine fitted. I can buy a Honda gx390 engine for £100 but was wondering if it has same mount holes so it just bolts straight into my kart? If the Honda gx390...
  14. D

    Whats model of my engine please

    Poboy I will get more pics tomorrow and sort my profile out properly. And Afremont your correct about that spring I've connected that and was a little bit of pain to connect, the karts throttle was ok before I took tank off to clean it out, never worked on one of these engines before and they...
  15. D

    Whats model of my engine please

    http://youtu.be/B12rX9pWtTk Going to try this tomorrow as I think this is what needs doing to my kart to set up the throttle again, any suggestions?
Top