Recent content by dbwert

You bet. Had planned to do so to help others in the same situation. Just got my parts a few days ago. Havent had a chance to get it together yet. I will post pics as soon as I start wrenching on it again! :thumbsup:

Got it. Thank you for all your information and help. Could not have done it without your advice and input!!

Sounds good. Thank you. Gonna order 2 sets of these for upper and lower. I am going to either borrow a welder or have a friend of mine who owns a machine shop weld these on for me. Im thinking he may have a drill press. I will have to ask him. Just so I understand it correctly to explain to...

I understand the mis-alignment spacers now. Thanks. Am I correct with this game plan? - I am going to cut the tabs off, drill my holes into the a arms, weld on bungs on each a arm. Then thread my rod end into the bung. Below are the items I found that I am thinking will work...

Ok, thank you for that info. I am starting to understand this better now. Sorry about all the questions. Im a noob to this but learning. I had spoke to Todd over at QSC on ebay. Explained to him what I wanted to do and he said using heims will help increase steering by 3%. He recommended I...

Ok thank you. I pulled both A-Arms off. It appears in the pictures that he drilled holes and then just welded the rod ends on the A-Arm. Im assuming he/you used male rod ends and not female? If I understand it correctly, my mis-alignment spacers would slide over my bolt and then the bolt...

Wow, thank you Bubba, what a selection. I assume I could go with any desired size just so it wasnt bigger than the A-Arm for the hole I'll have drill. I'd think the bigger the rod end, the better. ---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ---------- Thank...

Thanks cavfire. I asked the question a bit to soon. I understand what you mean now with cutting off the tabs. I found these pics elsewhere of a build that I believe you are talking about. This set up will also give me adjustment for camber in and out because of the threaded bung, correct...

Thanks for all the info guys. Appreciate it. I dont want to sound dumb but I am trying to follow how the heim joints would mount. When you mentioned about cutting off the "tabs" what tabs are you referring to? I found these - if they are correct for me to use...

Thanks for the replies! Will look into those tires. Would like to get some knobbier ones for the rear too, better traction. It has the 7.8 hp howitt engine. It moves out pretty good. Top speed about 35 mph factory. Certainly would not want the front end blowing apart at those speeds. We take...

Yes you bet. I included a few pics. Thank you. :surrender:

Any advice from anyone?

Hey all, Im new here. I apologize if this is a topic thats already been discussed but I've been searching. Seen alot of different ideas on the web but looking for some advice on what would work best for our kart. Got a Yerf Dog GX150 Kart. I ended up breaking the lower A-Arm for the front...