Recent content by CrazyFazy

  1. C

    clutch??

    do you have a link for the one you found? I appreciate all the help.
  2. C

    clutch??

    ok cant seem to get any help from any of the cart places. My sprocket can be 8 1/2" before it hits. My teeth are 1/2" apart center to center. My shaft is 3/4" wide and it is a 4 bolt pattern that bolts up to my brake clutch. I need to know the od of a 72 or 80 tooth sprocket but it seems no one...
  3. C

    clutch??

    modifications are no problem as i am good with a welder. If i went with a 80 tooth where can i order it and what info do i need to know. I am thinking shaft diameter.....bolt hole configuration and possibly what size teeth on the sprocket is that correct? My teeth are 1`/2inch apart what does...
  4. C

    clutch??

    so if i stuck with a bigger sprocket your saying i would need one even bigger than a 72 correct?
  5. C

    clutch??

    ok using 2000 rpm and 13 inch tires with a 72 tooth driven gear and a 12 tooth engine gear i come up with 12.858 Is this good or bad then?? Does this mean the cart would only go 12 mph or what...lol
  6. C

    clutch??

    without knowing what gear will fit i cannot do this right? Or am i missing something? I would just be happy if the cart would do 30 mph and get there quick...lol
  7. C

    clutch??

    well i am going to be selling the cart and just need it to move....lol. I wonder if a 60 would fit? I dont care much about speed i just want it to be able to pull over the **** curb....lol So i am assuming going from the 45 to a 80 is like night and day then??
  8. C

    clutch??

    hmm..........so am i to assume then that my centrifugal clutch might not be bad after all....lol No wonder it would go like hell up in the airbut not at all on the ground. How do i know what kind to get? I dont know if the bolt patterns are even the same...lol
  9. C

    clutch??

    oh and another thing is that i am only 7/8 of an inch away from hitting a crossbar that connects the frame together so not sure how big i can go with the sprocket....
  10. C

    clutch??

    tires are 13 x 5.00 x 6 so what tooth sprocket would you recommend now? And yes it doesnt even move with my 100 pound son on it. The guy who owned it before me use to race it so i guess thats why the taller gearing. Thanks for the help guys.
  11. C

    clutch??

    bottom sprocket is 45 and the top is 10. When ya hit the gas it stumbles alot however if i could just run it by the governor it works great. The clutch is definitely slipping. The motor runs better at a little higher rpm so is there a way i can get a clutch that wont kick in so soon? That way i...
  12. C

    clutch??

    its not really a race kart just your ordinary kids go cart. As far as terrain it just has the small tires so i would be happy if it woud just take off and run up the street. My boy goes 100 pounds and it wount even pull him up over a little curb....
  13. C

    clutch??

    ok the plug is kind of black which tells me its running rich but doesnt this seem strange as its runs better with the choke partially closed? With the choke partially closed you are actually giving less air to the carb for the amount of fuel being used? Wouldnt the plug be showing more of a...
  14. C

    riding lawnmower engine wont stay running

    also a good way to clean carburetor air passages is to take a breadwrapper and strip the outer covering off of it and use this to make sure the ports are open..
  15. C

    clutch??

    ok i will post the tire size and the 2 sprocket sizes tomorrow. Anything else you need to determine the proper gearing? Thanks,,,eric
Top